Swann NVRx-7085/7285/7300 Oprogramowanie GA3.1
Typ pliku: Oprogramowanie.
System Operacyjny: AnyOS.
Nazwa pliku: nvrx-all_usb_update.zip.
Bit: 32/64 Bit.
Licencja: Darmowa.
Opis
Update:
– Download the correct package
Extract the package to the root directory of your thumb drive.
– If your NVR is currently turned on, insert the flash drive to the NVR’s USB port then restart the NVR. If your NVR is turned off, insert the flash drive first then connect the power adapter to the NVR.
– The NVR’s firmware will automatically be upgraded. During the upgrade procedure, the screen may flicker or go blank, don’t worry this is normal. The upgrade will take up to 10 minutes to complete.
– When the firmware upgrade has completed, the Setup Wizard will appear on-screen. Complete the Setup Wizard as per the Quick Start Guide included with your NVR (or at our website support.swann.com). Remove the flash drive from the USB port.
– To support the new remote playback feature, you must format the hard drive (all video events will be removed). In Live View mode, right-click the mouse to access the Menu Bar then click Menu. Click Device then click the checkbox next to the hard drive. Click the Init button to format the drive then click OK to confirm. Right-click the mouse to exit.
As the first note at the top states, the Build No. in the System Information area should now end with GA 3.1. The update has then been applied.
NB: To see if you need this update, in the recorder’s menu, go to System then System Information. If your Build No. ends in GA 3.1, this update is not needed.
IMPORTANT:
Before proceeding, if there are video events on the hard drive that are required, you will need to back these up prior to updating (see Search: Backup in the instruction manual available at support.swann.com). The hard drive will be unreadable immediately after the update, until you complete Step 5.
Pobierz