Stealth Cam STC-PX14 Camera Oprogramowanie 977.002
Typ pliku: Oprogramowanie.
System Operacyjny: AnyOS.
Nazwa pliku: STC-PX14-v977-002-Firmware-Update.zip.
Bit: 32/64 Bit.
Licencja: Darmowa.
Opis
This firmware version does the following:
– Improves power management.
– Improves camera stability.
Firmware Update:
Note: It is recommended to perform the firmware update using new batteries. Loss of battery power during the firmware update may cause the camera to be non-operational.
1. Download the PX14 (v977.002).zip file.
2. Unzip the file.
3. Go into the folder and copy the .ISP file to the root directory of a SD Card.
4. Remove power from camera by removing a battery from one of the battery components.
5. Place camera into CUSTOM mode.
6. Insert SD Card.
7. Hold the ENTER button and reinsert battery that was removed in Step 4.
8. Screen will display „-TEST-„. Release the ENTER button.
9. Use the up arrow to navigate to „TEST”. Press ENTER.
10. Use the up arrow to navigate to „UPGRADE”. Press ENTER.
11. The unit will enter upgrade mode and should display ” ,,
12. It takes about 2-3 minutes to upgrade.
13. After the upgrade, the unit will restart itself; remove power from the unit again.
14. Replace battery and place camera into CUSTOM mode.
15. Go into the Menu and select RESET, then YES to complete the upgrade.
Pobierz