Sound Devices 688 Field Mixer Oprogramowanie 3.01
Typ pliku: Oprogramowanie.
System Operacyjny: AnyOS.
Nazwa pliku: 688-firmware.
Bit: 32/64 Bit.
Licencja: Darmowa.
Opis
Nowy:
– Scrolling the SL-6 RF Scan plot using the HP encoder now skips over gaps of unused RF frequencies allowing for quicker scrolling through the RF plot.
Zmiany:
– Lectrosonics SRb and SRc are temporarily set to an output level of -50 dB during the SL-6 RF Scan process. This is to avoid unwanted loud signals sent to the 688 during the scan.
Naprawiony:
– SL-6 RF Scan does not complete correctly when three Wisycom MCR-42s are in use.
– General clean up of SL-6 RF Scan with Wisycom MCR42, including faster scan time.
– Lectrosonics SRb and SRc do not revert to previously selected frequencies after the SL-6 RF Scan when a frequency wasn’t assigned to the Receiver.
– SRc Block 606 Tx Switches are not displayed correctly in the 688 Rx Screen.
Firmware Installation Instructions:
– Download the 688 firmware file.
– From the zip archive, extract the file within. Copy this .prg file to the root level of an approved SD or CF memory card. Do not place the file in any folder. Do not place the zip file on the SD or CF card. The card must be formatted in the 688.
– Apply Update to 688.
– Power the 688 from external DC. Do not perform the update with low batteries or unstable power sources.
– Power down the 688 if it is already powered up.
– Insert the SD or CF card with the .prg file.
– Power on the 688.
– Navigate to Setup Menu option SYSTEM > Update Firmware and follow the on-screen instructions.
– When the update is complete the 688 will power cycle itself. The version number will be displayed briefly on the splash screen while booting up. A message box appears „Firmware updated successfully Version:688_XXX”. Press „OK”. Please note any changes or additions to the Setup Menu (if applicable). Consult the 688 User Guide and Technical Information for details.
Pobierz