Sound Devices 633 Field Mixer Oprogramowanie 3.10
Typ pliku: Oprogramowanie.
System Operacyjny: AnyOS.
Nazwa pliku: 633-firmware.
Bit: 32/64 Bit.
Licencja: Darmowa.
Opis
Nowy:
– Wsparcie dla 3rd party wireless control, timecode and metadata management including: Timecode Systems (WAVE and PureBlend’s MovieSlate iOS app) and Ambient Master Lockit.
– New menu option to disable the CL-12 Output level controls (L, R, X1 and X2). Options for MENU > CL-12 > L-X2 Gain Pots include: Enable or Disable.
– Take Designator can now be set to any alpha character or ’-’ (T is default) in MENU > FILE STORAGE > Take Designator.
Zmiany:
– Toggling PFL switch will now save edits to track names when edited from the Input Settings > Edit Channel # Name screen.
– While recording, the Take List’s Circle option for the Current Take is no longer available.
Naprawiony:
– Arming paired LR or X1/X2 tracks using the CL-12 LR, X1/X2 pots did not correctly operate on the pairs.
– Track Name entries from Input Settings Window would not hold if that track name already existed.
– Channels turned off from the CL-12 were reverting back to On after a power cycle.
– Some channel fader values, if attenuated to -infinity after power down, are not correctly applied after powering unit on.
– CL-12 Mix Bus Track LEDs could get out of sync when linked.
Known Issues:
– Auto-Mute timecode modes output timecode for a few seconds after booting up from a full shutdown.
– Sound Devices has worked directly with Delkin to identify an intermittent Media I/O issue with newer Delkin CF 500x and CF 700x cards. Delkin has confirmed that a recent change to these two cards is most likely responsible for the errors. Cards containing KZ in the serial number are susceptible to this issue and should not be used. Cards containing VB in the serial number will function correctly and are approved. Deklin CF 1000x and 1050x cards do not experience this issue and may continue to be used.
Firmware Installation Instructions:
– Sound Devices recommends backing up any existing audio data that may reside on the recorder. While no data on the storage is changed during the update process, it is best practice to backup the unit. In addition, it is highly recommended to save the current device settings since a firmware update can result in settings changing to factory default.
– Download the 633 firmware file.
– From the zip archive, extract the file within. Copy this .prg file to the root level of an approved SD or CF memory card. Do not place the file in any folder. Do not place the zip file on the SD or CF card. The card must be formatted in the 633.
– Apply Update to 633.
– Power the 633 from external DC. Do not perform the update with low batteries or unstable power sources.
– Power down the 633 if it is already powered up.
– Insert the SD or CF card with the .prg file.
– Power on the 633.
– Navigate to Setup Menu option SYSTEM > Update Firmware and follow the on-screen instructions.
– When the update is complete the 633 will power cycle itself. The version number will be displayed briefly on the splash screen while booting up. A message box appears „Firmware updated successfully Version: XXX”. Press „OK”. Please note any changes or additions to the Setup Menu (if applicable). Consult the 633 User Guide and Technical Information for details.
Pobierz