Sony VRD-VC20 DVDirect Oprogramowanie 1308 do XP
Typ pliku: Oprogramowanie.
System Operacyjny: AnyOS.
Nazwa pliku: VC201308.EXE.
Bit: 32/64 Bit.
Licencja: Darmowa.
Opis
This utility updates the VRD-VC20 firmware to version 1308 for video capturing support.
Download and Installation Instructions
– Aby upewnić się, że żaden inny program nie zakłóca instalacji, zapisz wszystkie prace i zamknij wszystkie inne programy. Pasek zadań powinien być wolny od aplikacji przed kontynuowaniem.
– Download the VC201308.EXE file to a temporary or download directory (please note this directory for reference).
Go to the directory where the file was downloaded and double-click the VC201308.EXE file to begin the installation.
– Follow the on-screen instructions to extract the files to the desired location.
– At the “WinZip Self-Extractor – VC201308.EXE” dialog, click the “Browse” button to locate and select the desired location to save the extracted files, then click “Unzip”.
– At the “2 file(s) unzipped successfully” dialog, click “OK”, and then click “Close”.
– Go to the directory where the 2 files were extracted, open the “vrdup1308” folder, and double-click the “vrdup1308.exe” file to start the installer.
– The firmware update application will detect the current firmware version and display both the current and new versions.
Note: If the current firmware version is “1308”, it is not necessary to perform the update. To close the application, click “Exit”
– At the “SONY VRD-VC20 Updater v1308” screen, click “Update”.
IMPORTANT: Do not turn off the drive or the computer during the update process.
– Wait for the “Status:” window to display “Update OK”, and then click “Exit” to finish.
The installation of the DVDirect VRD-VC20 Firmware Update for Video Capturing is complete.
Pobierz