Soloshot Canon EOS 600D-Rebel T3i Camera Controller Oprogramowanie 061015
Typ pliku: Oprogramowanie.
System Operacyjny: AnyOS.
Nazwa pliku: SS2_DSLR_061015.zip.
Bit: 32/64 Bit.
Licencja: Darmowa.
Opis
UWAGA:
– for Canon EOS 600D-Rebel T3i Camera
Installation Steps:
Step 1 | Jumpdrive 2.0
You need a USB 2.0 Jumpdrive to update firmware. Make sure USB:
– Has NO files on it.
– Jump drive must be formatted to FAT or FAT32.
Step 2 | Zip File
Download the zip file containing firmware
Step 3 | Unzip
Locate downloaded file and unzip to reveal firmware folder
Step 4 | Copy Files
Open folder and copy files from the firmware folder DIRECTLY to the USB 2.0 Jumpdrive.
Important: Do not copy the folder onto your Jumpdrive.
Step 5 | Dock Controller
While holding down the update button on top of Camera Controller, dock into Accessory Port on Base at 45-degree angle.
Push the controller flush to the Base until it clicks into place.
Step 5 | Controller Updates
Camera Controller LED will flash RED/GREEN during update.
LED 6 on Base will flash RED/GREEN as Controller updates.
Step 7 | Controller Updated
Camera Controller LED will turn RED when update complete.
On the Base:
– LED 1 will be blinking.
– LED 2 and 3 will be solid.
Step 8 | Release Controller
Slide the dock button down to release Camera Controller.
Remove jumpdrive from side of Base.
Pobierz