Satlantic SUNA V2 Sensor Oprogramowanie 2.5.1
Typ pliku: Oprogramowanie.
System Operacyjny: AnyOS.
Nazwa pliku: SUNA-LC_Release_2.5.1.zip.
Bit: 32/64 Bit.
Licencja: Darmowa.
Opis
This firmware revision fixes some unexpected complications with our recent release of firmware version 2.5.0. The bugs manifest when upgrading from a firmware before revisions 2.4.0 or 2.5.0.
Changes:
– Rebuilding the lamp time from the lamp use file now rejects invalid entries. Prior, invalid entries would generate incorrect lamp time values. Invalid entries are rare, affecting very few sensors.
– Initializes the wiper minimum interval at zero when upgrading from a firmware version prior to rev. 2.4.0, which did not have a wiper minimum interval implemented. This initialization ensures that a firmware upgrade will not change the sensor behavior.
Caution: SUNA cannot operate without a valid firmware. When upgrading the firmware, the existing firmware is erased, and the new firmware is written to memory. If the write process is interrupted, for example by a loss of power, SUNA may enter a non-responsive state. In case of a problem, contact Satlantic for support.
The following steps are required to upgrade to a new firmware:
– Download the new SUNA firmware file to your computer.
– Connect to the SUNA using SUNACom Software.
– Open the Firmware Upload Dialog via the Advanced selection in SUNACom’s Sensor menu.
– Browse to the location of the new Satlantic’s Firmware Upgrade File.
– Press the Upload button to start the upgrade.
– SUNA recognizes invalid firmware files, and rejects those.
– The complete firmware upgrade takes no longer than 2 minutes.
After the upgrade has been completed, SUNA is disconnected from SUNACom; the user must manually re-establish the connection.
Pobierz