Ricoh CX4 Digital Camera Oprogramowanie 1.05 do Windows 7
Typ pliku: Oprogramowanie.
System Operacyjny: Windows 7.
Nazwa pliku: cx4-105.zip.
Bit: 64 Bit.
Licencja: Darmowa.
Opis
Poprawki:
Modified the following phenomenon.
1. In the Night Landscape Multi-shot, when pressing the shutter release button half way, the camera shake warning symbol will not be displayed in the screen.
Firmware installation steps:
1. Copy the firmware to the SD memory card.
2. Remove the SD memory card from the PC card reader/card slot and insert it into the camera.
3. With the camera turned off, while pressing the ADJ./OK button upwards side, press and hold the Playback button down for 2 to 3 seconds.
– A message confirming the firmware update will appear on the picture display.
4. Press the ADJ./OK button toward the F side, select [YES], and press the ADJ./OK button.
– The firmware update will start, and the message shown below will display on the picture display.The firmware update should take about 30 seconds to complete.
– If a message saying, [Incorrect rewriting file] appears on the picture display and the power to the camera turns off automatically, check the model of the camera, and use the correct firmware to update the firmware again.
– If the message, [No rewriting file] is displayed, then the firmware was not copied to the SD memory card correctly.Confirm that the file was copied correctly.
5. After updating the firmware is completed, the power to the camera will once turn off automatically, and then the power will turn on in playback mode.
6. Turn off the power to the camera.
Pobierz