Pyle IP PIPCAM15 IP Camera Oprogramowanie 17.1.3.24
Typ pliku: Oprogramowanie.
System Operacyjny: AnyOS.
Nazwa pliku: JP6235_WEB UI_30_10_3_75_1020_pyle.apc.
Bit: 32/64 Bit.
Licencja: Darmowa.
Opis
Ten pakiet zawiera niezbędne pliki instalacyjne Pyle IP PIPCAM15 IP Camera Firmware 17.1.3.24. Using this Firmware w wersji will allow you to install future upgrades directly through the Pyle IP mobile app.
BEFORE ATTEMPTING:
– Check your current firmware version from the web UI. We need this so we can download the correct files.
– Log into the camera web UI. Navigate to: „System” > „Device Info”. Web UI and firmware version are listed here.
– If your version number matches the version listed below, then you need to update:
PIPCAM15: 17.1.3.24
– Do not update if your version is not listed. It can corrupt your camera!
Kroki instalacji:
1) Log into the PIPCAM15 Web UI.
2) Download the Firmware files and save them to your desktop.
3) In the web UI, navigate to „Multi-Device” > „Upgrade Device Firmware”.
4) Upgrade the device firmware:
-Click „Choose File”
– Navigate to the .APS file on your desktop
– Select
– Click „Submit”
5) Allow the camera to reboot. (The browser will count down from 60 and the camera will reboot running through the full range of pan and tilt).
6) Upgrade the web UI:
-Click „Choose File”
– Navigate to the .APC file on your desktop
– Select
– Click „Submit”
7) Allow the camera to reboot (The browser will count down from 60 and the camera will reboot running through the full range of pan and tilt).
8) Navigate to: System > Device info
9) Check that the firmware and web UI version numbers match the files provided.
Pobierz