Pelco Sarix IXP11 IP Camera Oprogramowanie 03.28
Typ pliku: Oprogramowanie.
System Operacyjny: AnyOS.
Nazwa pliku: IXP11 Firmware v03.28.zip.
Bit: 32/64 Bit.
Licencja: Darmowa.
Opis
Major Fixes
– Corrected an issue preventing the bit rate from decreasing proportionately when a lower bit rate was appropriate (for example, in simple scenes with little or no motion).
– Corrected an issue causing some cameras to generate the same UDN.
– Corrected an issue causing some cameras to disconnect unexpectedly from Digital Sentry servers.
– Corrected an issue causing 5 MPx models to experience exposure oscillation in Day Mode at low lux levels.
– Corrected an issue preventing users from correctly setting threshold blocks for motion detection through both the Endura Workstation software or DS ControlPoint.
– Effectively lowered the call-up latency time for cameras below one second.
– Corrected an issue preventing users from logging in using passwords containing special characters.
– Users can now assign host names or device names containing periods to cameras.
– Corrected an issue causing a solarization effect in video from IBP models with IR, when the camera’s IR LEDs were turned on.
– Corrected an issue preventing the camera’s host name from reflecting a user’s changes in the Web client.
Now, when a user changes the camera’s host name, the camera will restart and reflect the correct host name.
UPGRADING FIRMWARE FROM CAMERA WEB INTERFACE:
1. Use Internet Explorer to access the camera via its IP address.
2. Click on the Login link in the upper right corner of the page and then enter credentials for the administrator.
3. Click Settings and then navigate to the Firmware page under the System menu.
4. Click Browse to select the firmware file and then click Upload.
The camera will install the updated firmware and then restart. The firmware update process typically takes up to 5 minutes to complete.
Pobierz