Panasonic AU-XPD1 Memory Card Drive Firmware Update Narzędzie 1.20/2.02 do Mac OS
Typ pliku: Narzędzie.
System Operacyjny: Mac.
Nazwa pliku: DVLH1002ZB.zip.
Bit: 32/64 Bit.
Licencja: Darmowa.
Opis
The following are improved:
– If AU-XPD1 drive is left un-operated in the state of being connected, the drive letter for it is deleted. (It is unmounted.)
– If a clip is written to a card, the drive starts working incorrectly and its USB link is disconnected.
Updating Procedure:
– Download AU-XPD1 latest firmware update file and put it in any folder in your PC.
– If your PC is connected with two or more AU-XPD1 memory card drives, the update cannot be performed correctly. Be sure to perform the update with only one AU-XPD1 drive connected.
– Disable the standby / hibernate setting of your PC.
– If P2 cards are in the slots of AU-XPD1, take them all out.
– AU-XPD1 require the power supply with USB3.0 or AC Adaptor.
– Double-click the downloaded file to extract it, and the “DVLH1001ZB” folder will appear. So copy this folder to an appropriate location.
– Double-click the “Xpd1UpdateTo202_120.exe” file in the “DVLH1001ZB” folder to start the update. The confirmation dialog for access request will be displayed. So click [OK] to proceed.
– When AU-XPD1 is recognized correctly, following screen is displayed. Please proceed to the next step.
– If the screen is displayed as follows, AU-XPD1 is not recognized. Please check the connection with PC again.
– Click the [Execute] button to start the update.
– It takes about a few minutes to complete the update.
– When the update is completed, the following screen will be displayed as below.
– With these steps, the update will be completed.
Pobierz