OCZ SSD Narzędzie 2.3.2963 64-bit
Typ pliku: Narzędzie.
System Operacyjny: Windows 10, Windows 7, Windows 8, Windows 8.1.
Nazwa pliku: SSDUtility_2.3.2963_Linux.zip.
Bit: 64 Bit.
Licencja: Darmowa.
Opis
This is a maintenance release of SSD Utility, with the following enhancements:
– Support added for TR200.
– Fixed an instance where TL100 SSD graphic would disappear.
– Updated company and copyright information.
Known Issues:
– TL100 Firmware update may fail on Windows 7 if the Intel RSTe driver is installed. To work around this, use bootable SSD Utility to perform the update.
– TL100 benchmark results may degrade if re-run immediately after a previous benchmark. Workaround is to wait a minute or two before re-running the benchmark.
– On some PCs it is impossible to perform secure-erase: this happens if the PC BIOS issues SECURITY FREEZE LOCK the drive, and does not implement the suspend/resume cycle used to unfreeze it. Workaround is to use the secure erase feature in the BIOS if there is one, otherwise to perform secure erase on another PC.
– On some laptops with dual Intel & NVIDIA graphics, SSD Utility may crash. This can be fixed by updating the Intel & NVIDIA drivers.
– The mouse cursor is not displayed when using Bootable SSD Utility with a DisplayPort connection with a GeForce 1070. Workaround is to boot in safe mode.
– Due to a bug in version 2.2.2645, when using the update feature from within the application, the update may fail with a message “Error installing.” Workaround is to download manually the latest version from ocz.com.
Important Notes About SSD Utility:
– Windows and Linux: Make sure to set your SATA controller to AHCI mode in the motherboard BIOS if it is not; for instructions see the user documentation for your computer.
– SSD Utility is required to be run as a system administrator.
– Internet connection is required for firmware and BIOS update.
– Updating your firmware with the SSD Utility is not supported under Windows XP.
– Make back-up copies of any data on the SSD that you want to keep; some operations result in the complete loss of data on the SSD (you will be warned if this will occur).
Aby zainstalować ten pakiet, wykonaj następujące czynności:
– Upewnij się, że spełnione są wszystkie wymagania systemowe.
– Zapisz pakiet do pobrania w dostępnej lokalizacji (np. Na pulpicie).
– Zlokalizuj i kliknij dwukrotnie nowo pobrany plik.
– Zezwól systemowi Windows na uruchomienie pliku (jeśli to konieczne).
– Przeczytaj Umowę licencyjną użytkownika końcowego (Umowa licencyjna użytkownika końcowego) i zgódź się kontynuować proces instalacji.
– Postępuj zgodnie z instrukcjami wyświetlanymi na ekranie.
– Zamknij kreatora i ponownie uruchom system, aby zmiany odniosły skutek.
Pobierz