Nikon D5 Camera Oprogramowanie 1.40
Typ pliku: Oprogramowanie.
System Operacyjny: Windows 10, Windows 7, Windows 8, Windows 8.1.
Nazwa pliku: F-D5-V140W.exe.
Bit: 64 Bit.
Licencja: Darmowa.
Opis
Naprawiono następujące problemy:
– Added support for Type B CFexpress memory cards. For more information, see the Nikon support website for your country or region.
– Users can now choose the band (2.4 or 5 GHz) for the host SSID when connecting to wireless networks via a WT-6 or WT-5 wireless transmitter attached to the camera. The band is listed in Connection Wizard network-selection dialog and post-connection in the Network display.
– Fixed an issue that prevented normal shutter release and caused an error to be displayed if all the following conditions were met during shooting in photo live view: A Type E lens and a flash unit such as the SB-5000 were attached ; A shutter speed of 1/500 s or faster was selected with Auto FP High-Speed Sync enabled ; Single frame was selected for release mode, or self_time (Self-timer mode) was selected with the number of shots for Custom Setting c3 (Self-timer) set to 1.
– Note: For information on the license for the open-source software included in the camera’s NVM Express driver, see “BSD License (NVM Express Driver)”.
Notice:
– Users of the software listed below will need to update to the following versions to support the changes in this firmware update: Camera Control Pro 2 version 2.25.1 or later, ViewNX-i version 1.2.8 or later
Wyświetlanie wersji oprogramowania aparatu:
– Włącz aparat.
– Naciśnij przycisk MENU aparatu i wybierz Wersja oprogramowania w MENU USTAWIEŃ, aby wyświetlić wersję oprogramowania aparatu.
– Sprawdź wersję oprogramowania aparatu.
– Wyłącz aparat.
Aktualizacja oprogramowania sprzętowego kamery:
– Utwórz folder na dysku twardym komputera i nadaj mu nazwę zgodnie z potrzebami.
– Download and run the firmware to extract the following file to a folder named “D5Update”
– Using a card slot or card reader, copy .bin to a memory card that has been formatted in the camera.
– Włóż kartę pamięci do gniazda 1 w aparacie i włącz aparat.
– Select Network in the SETUP MENU and confirm that OFF is selected for Network connection.
– Wybierz wersję oprogramowania układowego w MENU KONFIGURACJI i postępuj zgodnie z instrukcjami wyświetlanymi na ekranie, aby zakończyć aktualizację oprogramowania układowego.
– Po zakończeniu aktualizacji wyłącz aparat i wyjmij kartę pamięci.
– Sprawdź, czy oprogramowanie zostało zaktualizowane do nowej wersji.
Pobierz