NETGEAR GS728TPS Switch Oprogramowanie 5.3.0.36
Typ pliku: Oprogramowanie.
System Operacyjny: AnyOS.
Nazwa pliku: GS728TS_GS728TPS_GS752TS_GS752TPS_V5.3.0.36.zip.
Bit: 32/64 Bit.
Licencja: Darmowa.
Opis
Bug Poprawki:
– GUI page for LLDP can be opened with a URL without logging in to the switch.
Notes:
– SNMP community with public or private community string will be removed.
– To configure SNMPv3, the Authentication Protocol must be configured as MD5 or SHA. The ‘none’ option for Authentication Protocol is no longer allowed.
– Smart Control Center (SCC) is set to Disabled by default. The SCC Utility can still discover the switch even if SCC is disabled.
– NETGEAR 10G SFP+ modules AXM761/762/763 can be used for long-distance stacking for the GS7xxTS/TPS. However, the stacking bandwidth is still 2.5G per port.
Upgrade Procedure:
– Download the new firmware, store it in local PC, and remember its location in the PC’s file system.
– Unzip it to get the switch image.
– Go to GUI page “Maintenance > File Management > Dual Image > Dual Image Configuration”, find the backup (next-active) image.
– Support the backup-image is image1, then go to “Maintenance > Download > HTTP File Download”, set File Type as ‘Archive’, set Image Name as ‘Image1’, select the firmware file stored in local PC via Browser button, then click Apply button to start firmware downloading.
– The download will take several minutes. Do not power cycle the switch before and the success message shows up as below.
– Go to GUI page “Maintenance > File Management > Dual Image > Dual Image Configuration”, set ‘Unit Number’ as ‘All’; set ‘Image Name’ with Image1; check the checkbox of ‘Activate Image’, then Apply.
– Go to GUI page “Maintenance > File Management > Dual Image > Dual Image Status”, to double check the firmware version is correctly downloaded to image1 and image1 is the ‘next-active’ image. If not, go back to step 3 to download the switch image again.
– Go to GUI page ‘Maintenance > Reset > Device Reboot’, set ‘Reboot Unit No.’ as ‘All’ (default option); check the checkbox then click Apply button.
– After the switch is restarted, login the switch to double check whether the FW is upgraded correctly, via GUI page of “GUI page System > Management > System Information”.
Pobierz