MOTU AVB 8M Audio Interface Oprogramowanie 1.2.1+937
Typ pliku: Oprogramowanie.
System Operacyjny: AnyOS.
Nazwa pliku: MOTU-AVB-1.2.1%2B937-for-8M%2C-16A%2C-1248-and-112D.update.
Bit: 32/64 Bit.
Licencja: Darmowa.
Opis
Firmware Change Log:
– Addressed an issue with FireFox where device settings would appear to get lost.
– Fixed an issue where the AVB device was not recognizing active DHCP changes.
– Improved the USB connection to the computer to better handle sleep and wake.
– LCD contrast level is now retained through power-cycling.
MOTU AVB firmware update:
If your MOTU AVB interface (and the computer it is connected to) has no internet access, you can download a firmware update file from another computer that does have internet, and then use the file to update your MOTU interface, as follows:
– Download the latest firmware file.
– Transfer the file to a computer with a network cable connection to your MOTU interface.
– Launch the MOTU AVB Control web app on the computer, as usual.
NOTE: Make sure the web app is communicating with your interface using the device’s IP address or „.local” address, which ensures that communication is through the network connection for the firmware update. To do so, check that the URL in your web browser reads something like „192.168.3.196” or „http://1248.local/ „, not „http://localhost:1280” (which means the connection is through USB or Thunderbolt). If not, close your browser window and choose your interface again from the Discovery App menu. If the network connection has been established successfully, the icon for your device in the Discovery App menu looks like the interface itself (instead of a laptop icon, which indicates a USB or Thunderbolt connection). If you are running on Windows, press the ID button on your interface to get its IP address, then type that address into your browser.
– Go to the Device tab.
– Scroll down to the bottom and click „Update from File”.
– Locate the file on your hard drive and click OK to start the update.
– Wait a few moments for the update to finish, then click OK to return to the Device tab.
NOTE:
when installing new firmware, also be sure to install the latest Mac and Windows drivers found at the top of this web page.
For Windows operation, added 'Host Safety Offset’ setting (previously known as 'USB Streaming Mode’) in the web app Device tab.
Pobierz