MikroTik RouterOS X86 Oprogramowanie 7.1 Beta 2
Typ pliku: Oprogramowanie.
System Operacyjny: AnyOS.
Nazwa pliku: all_packages-x86-7.1beta2.zip.
Bit: 32/64 Bit.
Licencja: Darmowa.
Opis
Zmiany w tym wydaniu:
– arm – added support for automatic CPU frequency stepping for IPQ4018/IPQ4019 devices;
– arm – improved stability when forcing 25G speed on unsupported interface;
– bridge – allow to exclude interfaces from extended ports (CLI only);
– bridge – fixed host table update on SNMP query;
– bridge – show error when switch do not support controlling bridge or port extension (CLI only);
– bridge – show „H” flag for extended bridge ports;
– certificate – clear challenge password on renew;
– crs3xx – added initial Bridge Port Extender support (CLI only);
– crs3xx – added initial Controlling Bridge support for CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices (CLI only);
– crs3xx – fixed „custom-drop-packet” and „not-learned” switch stats for CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices;
– crs3xx – fixed hardware offloaded MPLS forwarding when using bonding interfaces;
– crs3xx – fixed QSFP+ interface LEDs when using break-out cable for CRS326-24S+2Q+;
– crs3xx – fixed QSFP+ interface linking after reboot for CRS326-24S+2Q+ (introduced in v6.47);
– crs3xx – fixed switch „not-learned” stats for CRS305, CRS326-24G-2S+, CRS328-24P-4S+, CRS328-4C-20S-4S+, CRS318 devices;
– crs3xx – improved Ethernet port group traffic forwarding for CRS354 devices;
– crs3xx – improved system stability when using hardware offloaded MPLS;
– defconf – improved default configuration generation on devices with non-default wireless interface names;
– discovery – send the same „Chassis ID” on all interfaces for LLDP packets;
– discovery – use „static” interface list by default instead of „!dynamic”;
– dot1x – fixed duplicate EAP request packets for server;
– dot1x – fixed EAP packet version numbering;
– fetch – show status „uploaded” instead of „downloaded” when uploading a file;
– filesystem – fixed repartition on non-first partition;
– filesystem – fixed repartition on RB4011 series devices;
– filesystem – improved long-term filesystem stability and data integrity;
– gps – fixed „init-channel” release when not used;
– health – changed PSU state parameter type to read-only;
– health – removed unused „heater-control” and „heater-threshold” parameters;
– hotspot – added „vlan-id” parameter support for hosts and HTML pages;
– hotspot – do not verify Hotspot interface status when detecting if HTTP/HTTPS login method is allowed;
– hotspot – ignore packets from host while MAC authentication is in progress;
– interface – added new builtin „static” interface list;
– ipsec – fixed client certificate usage when certificate is renewed with SCEP;
– kidcontrol – fixed „time-unlimited-rate” to engage in correct time;
– l2tp – fixed multiple tunnel establishment from the same remote IP address (introduced in v6.47);
– lora – expose „joinEui” un „devEui” values in the log;
– lora – fixed „spoof-gps” parameter padding (introduced in v6.47.1);
– lte – added „comment” parameter for APN profiles;
– lte – fixed dynamic DHCP client creation when editing APN profile;
– lte – fixed multiple passthrough APN default route installation;
– lte – fixed RSCP value reporting;
– lte – validate interface existence on initiation;
– ospf – fixed case when changing one distribution metric changed metrics for other distribution options;
– ospf – fixed disappearing NSSA default route;
– ospf – fixed processing of „unknown” LSA type;
– ospf – optimized LSA printing for smaller message sizes;
– poe – fixed „power-cycle” functionality on RB960GSP;
– ppp – fixed PPP interface editing for the first time after reboot or after 20 seconds;
– routerboot – fixed etherboot FCS errors with 100Mbps rate for CRS309, CRS317 devices („/system routerboard upgrade” required);
– routerboot – fixed memory test on CCR2004-1G-12S+2XS („/system routerboard upgrade” required);
– sfp – stabilized CRS212 SFP port functionality and improved monitoring of optical modules;
– sftp – fixed „flash” directory access (introduced in v6.46);
– smb – fixed file path validation (introduced in v6.46);
– snmp – fixed „current” value reporting on CCR series devices;
– snmp – fixed „fan-speed” value reporting on CCR series devices;
– ssh – skip interactive authentication when not running in interactive mode;
– tr069-client – added additional wireless registration table parameters;
– tr069-client – added wireless „noise-floor” and „overall-tx-ccq” information parameters;
– traffic-flow – added NAT event logging support for IPFIX;
– webfig – fixed default value presence when creating new entries under „IP->Kid Control”;
– webfig – fixed negative value usage in „spoof-gps” parameter (introduced in v6.47.1);
– wireless – added support for U-NII-2 for cAP ac;
– wireless – added support for U-NII-2 for wAP ac;
– wireless – updated „canada” regulatory domain information;
– wireless – updated „indonesia5” regulatory domain information;
– wireless – updated „no_country_set” regulatory domain information;
– wireless – updated „united states” regulatory domain information;
– www – improved WWW service stability when receiving bogus packets;
Other changes since v6.47.1:
– arm – added support for automatic CPU frequency stepping for IPQ4018/IPQ4019 devices;
– arm – improved watchdog and kernel panic reporting in log after reboots on IPQ4018/IPQ4019 devices;
– bonding – added LACP monitoring (CLI only);
– bridge – added warning message when port is disabled by the BPDU guard;
– bridge – correctly remove dynamic VLAN assignment for bridge ports;
– bridge – fixed dynamic VLAN assignment when changing port „frame-type” property (introduced in v6.46);
– bridge – fixed dynamic VLAN assignment when changing port to tagged VLAN member;
– bridge – fixed local MAC address removal from host table when deleting bridge interface;
– bridge – improved BPDU guard logging;
– chr – improved interface loading on startup on XEN;
– chr – improved system stability when changing flow control settings on e1000;
– crs3xx – added initial Bridge Port Extender support (CLI only);
– crs3xx – added initial Controlling Bridge support for CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices (CLI only);
– crs3xx – fixed duplicate host entries when creating static switch hosts;
– dhcpv6-server – added ability to generate binding on first request;
– dns – do not use type „A” for static entries with unspecified type;
– dns – fixed listening for DNS queries when only dynamic static entries exist (introduced in v6.47);
– export – fixed RouterBOARD USB „type” parameter export;
– fetch – show status „uploaded” instead of „downloaded” when uploading a file;
– filesystem – improved long-term filesystem stability and data integrity;
– ike1 – allow using „my-id” parameter with XAuth;
– ike1 – fixed policy update with and without mode configuration;
– ike1 – rekey phase 1 as responder for Windows initiators;
– ike2 – added „prf-algorithm” support for phase 1;
– ike2 – improved child SA rekeying process;
– ipsec – added SHA384 hash algorithm support for phase 1 (CLI only);
– ipsec – fixed multiple warning message display for peers;
– ipsec – inactivate peer’s policy on disconnect;
– kidcontrol – allow creating static device entries without assigned user;
– lte – added „age” column and „max-age” parameter to „cell-monitor” (CLI only);
– lte – added „comment” parameter for APN profiles (CLI only);
– ppp – added „ipv6-routes” parameter to „secrets” menu;
– ppp – added support for „Framed-IPv6-Route” RADIUS attribute;
– qsfp – fixed break-out cable linking after reboot (introduced in v6.47);
– route – improved stability when 6to4 interface is configured with disabled IPv6 package;
– smb – fixed possible memory leak;
– smb – fixed SMB server (introduced in v6.47);
– smb – limit active session count to 5 per connection;
– ssh – fixed returned output saving to file when „output-to-file” parameter is used;
– system – replace „3” in superscript to „^3” on RBD53GR devices;
– tr069-client – added LTE model and revision parameters;
– tr069-client – added „X_MIKROTIK_MimoRSRP” parameter for LTE RSRP value reporting;
– tr069-client – allow passing LTE firmware update URL as XML;
– winbox – allow performing „USB Power Reset” on „0” bus on RBM33G;
– winbox – fixed „IP->Kid Control->Devices” table automatic refreshing;
– winbox – fixed minor typo in „Users” menu;
– winbox – fixed „receive-errors” setting persistence under „Wireless/Wireless Sniffer/Settings” menu;
– winbox – fixed „tls-version” parameter setting under „IP/Services” menu;
– winbox – use health values reported by gauges for „System/Health” menu;
– wireless – create „connect-list” rule when address specified for „setup-repeater”;
Pobierz