MikroTik RouterOS TILE Oprogramowanie 6.48 RC 12
Typ pliku: Oprogramowanie.
System Operacyjny: AnyOS.
Nazwa pliku: all_packages-tile-6.48beta12.zip.
Bit: 32/64 Bit.
Licencja: Darmowa.
Opis
What’s new in 6.48beta12:
– arm – added support for automatic CPU frequency stepping for IPQ4018/IPQ4019 devices;
– arm – improved watchdog and kernel panic reporting in log after reboots on IPQ4018/IPQ4019 devices;
– bonding – added LACP monitoring (CLI only);
– bridge – added warning message when port is disabled by the BPDU guard;
– bridge – correctly remove dynamic VLAN assignment for bridge ports;
– bridge – fixed dynamic VLAN assignment when changing port „frame-type” property (introduced in v6.46);
– bridge – fixed dynamic VLAN assignment when changing port to tagged VLAN member;
– bridge – fixed local MAC address removal from host table when deleting bridge interface;
– bridge – improved BPDU guard logging;
– chr – improved interface loading on startup on XEN;
– chr – improved system stability when changing flow control settings on e1000;
– crs3xx – added initial Bridge Port Extender support (CLI only);
– crs3xx – added initial Controlling Bridge support for CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices (CLI only);
– crs3xx – fixed duplicate host entries when creating static switch hosts;
– crs3xx – fixed HW offloading for netPower 15FR and netPower 16P devices (introduced in v6.47);
– crs3xx – fixed increased CPU temperature for CRS354-48G-4S+2Q+ device (introduced in v6.47);
– crs3xx – improved Ethernet port group traffic forwarding for CRS354 devices;
– defconf – fixed default configuration loading on RBmAPL-2nD;
– defconf – improved default configuration generation on devices with changed wireless interface names;
– dhcpv6-server – added ability to generate binding on first request;
– dhcpv6-server – disallow changing binding’s „prefix-pool”;
– dhcpv6-server – improved stability when changing server for static bindings;
– dns – do not allow setting „forward-to” same as „name” or „regex”;
– dns – do not allow setting zero value IP addresses for „A” and „AAAA” records;
– dns – do not use DoH for local queries when a server is specified;
– dns – do not use type „A” for static entries with unspecified type;
– dns – fixed listening for DNS queries when only dynamic static entries exist (introduced in v6.47);
– export – fixed HotSpot „address-per-mac” parameter export;
– export – fixed RouterBOARD USB „type” parameter export;
– fetch – show status „uploaded” instead of „downloaded” when uploading a file;
– filesystem – fixed increased „sector writes” reporting (introduced in v6.47);
– filesystem – improved long-term filesystem stability and data integrity;
– ftp – fixed possible buffer overflow;
– ike1 – allow using „my-id” parameter with XAuth;
– ike1 – fixed policy update with and without mode configuration;
– ike1 – rekey phase 1 as responder for Windows initiators;
– ike2 – added „prf-algorithm” support for phase 1;
– ike2 – fixed initiator child SA init without policy;
– ike2 – fixed policy reference for pending acquire;
– ike2 – improved child SA rekeying process;
– ike2 – retry RSA signature validation with deduced digest from certificate;
– ipsec – added SHA384 hash algorithm support for phase 1 (CLI only);
– ipsec – do not update peer endpoints for generated policy entries (introduced in v6.47);
– ipsec – fixed multiple warning message display for peers;
– ipsec – inactivate peer’s policy on disconnect;
– kidcontrol – allow creating static device entries without assigned user;
– lora – added „spoof-gps” parameter for fake GPS coordinate sending;
– lora – fixed JSON statistics inaccuracies;
– lte – added „age” column and „max-age” parameter to „cell-monitor” (CLI only);
– lte – added „comment” parameter for APN profiles (CLI only);
– lte – added support for MTS 8810FT;
– lte – fixed modem initialization when multiple modems are used simultaneously;
– lte – fixed PDP authentication configuration for SIM7600;
– metarouter – fixed image importing (introduced in v6.46);
– ospf – improved route tag processing for OSPFv3;
– ppp – added „ipv6-routes” parameter to „secrets” menu;
– ppp – added support for „Framed-IPv6-Route” RADIUS attribute;
– ppp – allow specifying pool name for „remote-ipv6-prefix-pool” parameter;
– profile – fixed „unclassified” load reporting on PowerPC devices (introduced in v6.47);
– qsfp – fixed auto-negotiation status;
– qsfp – fixed break-out cable linking after reboot (introduced in v6.47);
– qsfp – ignore FEC mode when set to fec91, only fec74 mode is supported (introduced in v6.47);
– route – improved stability when 6to4 interface is configured with disabled IPv6 package;
– routerboard – fixed „mode-button” support on SMIPS devices (introduced in v6.47);
– routerboard – fixed „reset-button” menu presence on all devices;
– smb – fixed possible memory leak;
– smb – fixed SMB server (introduced in v6.47);
– smb – limit active session count to 5 per connection;
– ssh – fixed returned output saving to file when „output-to-file” parameter is used;
– supout – added „LoRa” section to supout file;
– switch – fixed MAC address learning on switch-cpu port for Atheros8316, Atheros8227 and Atheros7240 switch chips;
– system – replace „3” in superscript to „^3” on RBD53GR devices;
– tr069-client – added LTE model and revision parameters;
– tr069-client – added „X_MIKROTIK_MimoRSRP” parameter for LTE RSRP value reporting;
– tr069-client – allow passing LTE firmware update URL as XML;
– w60g – added „mdmg-fix” parameter for RBwAP60Gx3 (CLI only);
– winbox – allow performing „USB Power Reset” on „0” bus on RBM33G;
– winbox – fixed flag displaying under „IP/DNS/Static” table;
– winbox – fixed „IP->Kid Control->Devices” table automatic refreshing;
– winbox – fixed minor typo in „BGP/Peer” menu;
– winbox – fixed minor typo in „Users” menu;
– winbox – fixed „receive-errors” setting persistence under „Wireless/Wireless Sniffer/Settings” menu;
– winbox – fixed „tls-version” parameter setting under „IP/Services” menu;
– winbox – hide irrelevant switch port parameters;
– winbox – use health values reported by gauges for „System/Health” menu;
– wireless – changed „station-roaming” default setting from „enabled” to „disabled”;
– wireless – create „connect-list” rule when address specified for „setup-repeater”;
– wireless – updated „bangladesh” regulatory domain information;
– wireless – updated „egypt” regulatory domain information;
Pobierz