MikroTik RouterOS MIPSBE Oprogramowanie 6.45.8
Typ pliku: Oprogramowanie.
System Operacyjny: AnyOS.
Nazwa pliku: all_packages-mipsbe-6.45.8.zip.
Bit: 32/64 Bit.
Licencja: Darmowa.
Opis
What’s new in 6.45.8:
– capsman – fixed background scan showing incorrect regulatory domain mismatch error (CAP upgrade required);
– capsman – improved radar detection algorithm;
– chr – improved stability when changing ARP modes on e1000 type adapters;
– console – fixed “clear-history” restoring historic actions after power cycle;
– console – removed “edit” and “set” actions from “System/History” menu;
– console – updated copyright notice;
– crs305 – disable optical SFP/SFP+ module Tx power after disabling SFP+ interface;
– dhcpv4-server – improved stability when RADIUS interim update is sent;
– dhcpv6-client – fixed timeout when doing rebind;
– dhcpv6-client – properly update bind time when unused prefix received from the server;
– dhcpv6-client – properly update IPv6 address on rebind;
– dhcpv6-server – fixed logged error message when using “address-pool=static-only”;
– dhcpv6-server – ignore prefix-hint from client’s DHCPDISCOVER if static prefix received from RADIUS;
– health – fixed health reporting on OmniTIK 5 PoE ac;
– ipsec – improved system stability when processing decrypted packet on unregistered interface;
– l2tp – improved system stability when disconnecting many clients at once;
– led – fixed default LED configuration for RBLHG-2nD and RBLHG-5HPnD;
– lte – show SIM error when no card is present;
– ppp – fixed connection establishment when receiving “0.0.0.0” DNS;
– ppp – fixed minor typo in “ppp-client” monitor;
– ppp – prioritize “remote-ipv6-prefix-pool” from PPP secret over PPP profile;
– qsfp – do not report bogus monitoring readouts on modules without DDMI support;
– qsfp – improved module monitoring readouts for DAC and break-out cables;
– routerboard – added “mode-button” support for RBcAP2nD;
– security – fixed vulnerability for routers with default password (limited to Wireless Wire), admin could login on startup with empty password before default configuration script was fully loaded;
– ssh – fixed output printing when “command” parameter used;
– timezone – updated time zone database to version 2019c;
– traffic-generator – improved memory handling on CHR;
– w60g – fixed “monitor” command on disabled interfaces;
– winbox – automatically refresh “Packets” table when new packets are captured by “Tools/Packet Sniffer”;
– winbox – show “LCD” menu only on boards that have LCD screen;
– wireless – added “ETSI” regulatory domain information;
– wireless – added “indonesia4” regulatory domain information;
– wireless – added U-NII-2 support forRBSXTsqG-5acD, RBLHGG-5acD-XL, RBLHGG-5acD, RBLDFG-5acD, RBDiscG-5acD;
– wireless – allow using “canada2” regulatory domain on US lock devices;
– wireless – fixed sensor MAC address reporting in TZSP header;
– wireless – improved compatibility by adding default installation mode and antenna gain for devices with integrated antennas;
– wireless – improved compatibility for Switzerland wireless country profile to improve compliance with ETSI regulations;
– wireless – improved IPQ4019, QCA9984, QCA9888 wireless interface stability;
Pobierz