LGMOD TV S6 Chipset Oprogramowanie 1.07.18
Typ pliku: Oprogramowanie.
System Operacyjny: AnyOS.
Nazwa pliku: lgmod_S6_10718.zip.
Bit: 32/64 Bit.
Licencja: Darmowa.
Opis
LGMOD is a modded rootfs for LG TVs models based on MStar Saturn 6 and 7 chipsets.
Poprawki:
– Made a correction.
Supported TV models:
– LGMOD is compatible with all MStar Saturn 6 and Saturn 7 based models (’At the moment EUROPEAN ONLY’):
’WARNING: TV models which have R letter at the end of the model marking are NOT supported. For example: 50PJ350R – is not supported. R models are Saturn 4 based.’
Installation:
1. Install for the first time – prepare TV:
– In TV menu „IN START”/”System 1” – set „Debug status” to „EVENT”/”DEBUG” (you can use PC audio out with ir diode from old remote control)
– In serial terminal (putty) press F9 and press F10 – you will see „:debugMain $” (you need RS232 serial cable)
– In debug, run 'sh’ command to start shell. If 'sh’ command is missing, then try:call debug_os_shell+0xb0
You will see linux shell prompt: „/mnt/lg/lginit #” (or „/lgsw #”).
2. Prepare dedicated USB drive:
– You need one FAT32 partition with min free space ~160 MB – full backup of all 25 TV partitions.
– Extroot archive have programs which does not fit in TV root partition.
– You need second partition with min size ~160 MB (EXT2/EXT3 because FAT/NTFS does not support sym.links).
Note: Installation script does NOT write log file! Save the log from serial terminal program (or setup logging to file).
3. Install/Upgrade LGMOD:
– Copy lgmod_S7_#.sh.zip and lgmod_S7_extroot.tar.gz to USB drive – FAT32 partition
– Attach the USB drive to TV and extract lgmod_S7_#.sh.zip archive:
sh lgmod_S7_#.sh.zip
– If installing LGMOD for first time – create full backup. In TV linux shell run:
sh /mnt/usb1/Drive1/install.sh backup
– Install LGMOD – flash lginit and rootfs partitions. In TV linux shell run:
sh /mnt/usb1/Drive1/install.sh install
– You have to restart TV after install.
– To copy and verify your backup – use TV remote control and safely <eject> USB drive.
4. Upgrade LGMOD:
– Once LGMOD is installed, you can upload files using ftp, scp or webui.
You can run above commands in telnet (recommended) or webui „tools/run”.
Note: extroot setup script is interractive – do _not_ run it from webui.
– To force full backup run: install.sh noinfo backup
5. Extroot: format EXT2/EXT3, extract and setup:
– If you like, prepare manually EXT2/EXT3 partition and extract extroot archive to '/extroot’.
– In TV linux shell run: /home/lgmod/extroot.sh /mnt/usb1/Drive1/lgmod_S7_extroot.tar.gz
– Be careful, script will ask you: to format EXT2/EXT3 partition; to delete old extroot directory
– Finally, script will update extroot config file (/mnt/lg/user/lgmod/extroot)
– You can try it – upload the info file to pastebin.com using wget from extroot:
/home/lgmod/info.sh paste
Pobierz