Kramer VP-731 Presentation Scaler-Switcher Oprogramowanie 1.12 Master
Typ pliku: Oprogramowanie.
System Operacyjny: AnyOS.
Nazwa pliku: vp-730_731_fw_1.12.zip.
Bit: 32/64 Bit.
Licencja: Darmowa.
Opis
The following changes were made in this version:
Added:
– A new setup was added for the Recall Settings command.
– RS-232 now sends the response (Z 0 73) before completing the power up/reset process.
– RS-232 normally responds after a command is executed. But for this “Recall Settings ” command, it sends a response first and executes it afterword.
Technical Notes:
– A new setup for the Recall Settings command was added.
Firmware Upgrade Procedure
1. Acquire xxx.brec file with the required version of firmware.
2. Copy this file to the route directory on any USB readable memory device (disk-on-key, flash memory card etc.).
3. Plug the device with the firmware file into USB connector of the VP728/729 and switch osan the scaler.
4. Wait until the scaler boots up and then use OSD menu to navigate to Setup>Advanced Setup>Misc>Firmware Download
5. Use UP and DOWN arrows to highlight the required firmware file and press ENTER button.
6. Confirm the upgrade and wait until progress indicator gets to 100%.
7. Restart the scaler by recycling the power.
Pobierz