Intel RealSense D415 Depth Camera Oprogramowanie 5.12.2.100
Typ pliku: Oprogramowanie.
System Operacyjny: AnyOS.
Nazwa pliku: Signed_Image_UVC_5_12_2_100.bin.
Bit: 32/64 Bit.
Licencja: Darmowa.
Opis
DFU Tool Steps
– Install Windows 10 on PC with USB 3 port.
– Copy and paste DFU tool and corresponding D400 series firmware .bin files to Windows 10 host. Note what directory files are stored.
– Open to DFU Tool directory; and right click RS400DfuConsole.exe and choose, Run as administrator. You can also open a command line as admin and run the RS400DfuConsole.exe from there.
– Plug D400 series camera into Windows 10 Host system via USB 3 cable into USB 3 port. Command line window should appear with main menu of tool being displayed. Press 2 then [ENTER] to display a list of updateable cameras.
– Notice a list is produced in command line window; press 1 [ENTER] to select D400 series camera and begin firmware update process.
– Prompt asks user to input file path of firmware .bin file. Type the full file path with firmware filename included and press [ENTER].
– Notice output of downloaded bytes transmitting, this process takes about 3 minutes until completion.
– When firmware upgrade is complete, the camera will reset. A windows icon saying Device is undergoing additional setup should pop up. The main menu will appear again.
– Verify the firmware version installed on camera by pressing, 3 and [ENTER].
– Notice the firmware version has changed on the connected Intel RealSense Camera.
Pobierz