Intel ir3 2208 ROC Hardware RAID Oprogramowanie 23.12.0-0013
Typ pliku: Oprogramowanie.
System Operacyjny: AnyOS, Windows 10, Windows 7, Windows 8.
Nazwa pliku: ir3_2208SASHWR_FWPKG-v23.12.0-0013.zip.
Bit: 32/64 Bit.
Licencja: Darmowa.
Opis
Firmware – 3.240.25-2382
– Coverity issues fix
– Sequential Read performance is less on CacheCade associated LD’s.
– Firmware returns invalid data in OOB packet
– Double media error getting corrected during check consistency
– [MR5.4] CacheCade: ECC/Medium/Unrecoverable read errors handling Enhancement
– Significant drop in Sequenial read performance with Read Ahead policy
– The reliability and error recovery of the SuperCap firmware was improved.
– Disk missing sporadically during reboot of Puma3
– Adjusted the USB phy boost value for the Mars controllers with SubDevice IDs between 3510 and 3515.
– NCQ support is disabled in FW
– Athena Rack BMC see clock stetching on I2C bus
– Timeout in CIMC when creating a hotspare
– CC2.1_RA_Support : Data Corruption upon creating WB CCVD during Cache Flush
– reading SATA IDENT information using STP_Passthru doesn’t work with latest
– Firmware blocked firmware download to interposer
BIOS – 5.42.00
– Extremely long delay when the controller POST in Legacy mode
– BIOS build date field is empty and build date is displayed as BIOS build time in SLT.
– OpROM not getting relocated to runtime segment if the segment address is 0xC0000
– Handle BT750 when B0 and D1 controller is present in HAMR system
– HAMR: BIOS to have a logic to filter CCVD and report Remote VD count at OpROM POST time
– FW Version number Truncated by one digit in OpROM POST screen
– BIOS: Provide scratch segment and populate info to assist Ctrl R to load latest host
– Update PERC9 Sub System Device Ids and the corresponding BBS strings.
– Retry read capacity if scsi status is not success
– MR HWR OpROM BIOS : OOB (BMC) function corrupts EBDA area used by other server function
Hii – 03.02.02.00
– HII hangs when trying to enter Configuration Management while in Safe Mode
– HII message for Safe Mode is not clear
– HEFU: Controller Status should reflect safe mode + don’t log debug messages in serial port
UEFI_Driver – 0x05270000
WebBIOS – 6.1-62-e_62-Rel
– Wrong spanned drive group size is displayed by Web bios(Ctrl-H)
PCLI – 05.07.00
FCODE – 4.12.05.00
NVDATA – MR2.1304.03-0118
– Added a subOEM 8 version of the AlcorTU 9273 controller and a subOEM 3 version of the Procyon 9290 controller
– Degraded performance comparison With the latest MR 5.3 -MR_3.190.25.1887 between Phase -3 Gemini Vs Phase -1 Gemini
BootBlock – 2.05.00.00-0010
Ctrl-R – 4.02-0001
BootBlockCommon – 07.26.13.219
ROMENV – 1.08
This firmware is valid for the products listed below:
– Intel Integrated RAID Module RMS25CB040
– Intel Integrated RAID Module RMS25CB080
– Intel Integrated RAID Module RMS25PB040
– Intel Integrated RAID Module RMS25PB080
– Intel Integrated RAID Module RMT3CB080
– Intel Integrated RAID Module RMT3PB080
– Intel RAID Controller RS25AB080
– Intel RAID Controller RS25DB080
– Intel RAID Controller RS25NB008
– Intel RAID Controller RS25SB008
Pobierz