ICARUS Reader Omnia G2 Oprogramowanie SN Before 2014
Typ pliku: Oprogramowanie.
System Operacyjny: Windows 7, Windows 8, Windows 8.1, Windows Vista, Windows XP.
Nazwa pliku: Omnia-before-2014-upgrade-package.zip.
Bit: 64 Bit.
Licencja: Darmowa.
Opis
UWAGA:
– FW_ICARUS_Omnia_G2_serial numbers before 2014
To upgrade the firmware of your ICARUS Omnia, do the following:
1. Pobierz aktualizację oprogramowania sprzętowego ze strony internetowej ICARUS. Nigdy nie instaluj uaktualnień z witryn innych firm, spowoduje to unieważnienie gwarancji. You can find the upgrade files in the Downloads Section of the website. Click on the image of the ICARUS Omnia to open the downloads for this product. If there are no files here it means that no firmware upgrade is available yet.
2. Rozpakuj plik do folderu na komputerze za pomocą narzędzia do dekompresji, takiego jak WinZip lub 7Zip. Prawdopodobnie możesz to zrobić nawet z funkcjonalnością systemu operacyjnego, ale zależy to od wersji systemu operacyjnego zainstalowanego na komputerze.
3. W pakiecie do pobrania znajdują się 3 pliki:
1) te instrukcje
2) plik z rozszerzeniem * .img i
3) the application LiveSuitPack_v1.07.
4. Run the LiveSuitPack_v1.07 application. This will unzip all files inside this archive to the current folder
5. In this folder there are several driver installation files with the names drvinstaller_IA64, drvinstaller_X64, drvinstaller_X86. If your operating system is Windows XP or lower, do not do anything with these files. If your computer’s operating system is Windows 7 32-bit, run drvinstaller_X86. If your operating system is Windows 7 64-bit, run drvinstaller_X64.
6. Run the application LiveSuit.exe
7. Press the button to select the actual firmware file. This file ends with the extension *.img and is found in the folder that you unzipped the firmware download package to 8. Now connect the ICARUS Omnia e-reader via the USB cable 9. Wait until the Omnia’s screen shows that there is a USB connection (“USB Connected”)
10. Click on the „Settings” button to install the firmware. In the pop-up screen that now opens, select yes.
11. A screen will pop-up.
Select No. This will do an upgrade without formatting the e-reader’s memory.
12. The e-reader will start upgrading, a progress bar will show the progress. Upgrading will take a couple of minutes 13. After a few minutes the update is complete.
14. The upgrade is now finished and the the e-reader will restart
15. After a firmware upgrade you will have to select your default language again
16. Your e-reader is now ready for use again!
Pobierz