Humax HD Fox-T2 Digital Recorder Custom Oprogramowanie 1.02.31_mod/3.02
Typ pliku: Oprogramowanie.
System Operacyjny: AnyOS.
Nazwa pliku: HD_FOX_T2_1.02.31_mod_3.02.zip.
Bit: 32/64 Bit.
Licencja: Darmowa.
Opis
Poprawki:
– Improve bringing up Wi-Fi connection in maintenance mode;
Thanks are due to Black Hole for the legwork in tracking the root cause of this issue down in the first place and to MontysEvilTwin for testing release candidates and providing valuable feedback;
– Display Wi-Fi on the front panel in maintenance mode, prior to displaying the IP address, if only a Wi-Fi connection is found;
– Show ENTERING MAINTENANCE MODE on front panel during maintenance mode boot;
– Add dlna command to the HDR maintenance mode menu to clear the DLNA database. Useful if you do a monthly maintenance boot for housekeeping (e.g. clear epg, clear dlna, check disk);
– Upgrade embedded telnet menu;
– Removed checks related to legacy mongoose web server;
Install Firmware:
– Pobierz oprogramowanie sprzętowe and, if it is a zip file, extract it
– Ensure the resulting file is named HD_FOX_T2_Upgrade.hdf
– Place the file in the root of a FAT32 formatted USB Flash / disk Drive *
– Put the unit into standby using the remote, or power button on the front
– Plug the USB Flash device into the USB port
– Turn on the TV and switch to the Humax input
– Press and hold down the power button on the front until you see the software update begin, and the progress is shown on the TV screen
– The initial download is very quick and then programming takes 2-3 minutes
– Pauses in the percentage time bar are quite normal
– When the update is complete End will appear on the front display and Success Downloading! will appear on the TV
– Unplug the USB Flash Device and delete the HD_FOX_T2_Upgrade.hdf file
– Reconnect a USB Flash / Hard Disk drive formatted in EXT2 / EXT3
– Press the power button on the front to restart with the new firmware
Note: The HD Fox T2 requires a USB Flash / Disk Drive with a minimum of 2GB to be connected when operating with Custom Firmware otherwise it will not be possible to install additional software packages, Flash devices must be formatted in EXT2 using a P.C. program such as GParted “Live” CD, Hard Disk devices can be formatted in EXT3 by the HD FOX T2
Some USB Flash / Disk Drives are reported not to work, The reason for this is not fully understood, However the following Tips are known to help:
– Ensure no other USB devices are connected
– Do not use a USB extender cable
– Removing all other files / full-formatting can prevent file fragmentation
– Try both USB ports (HDR)
– Smaller capacity drives seem to work more successfully than large ones
– Last Resort, Try a different USB Flash Drive
Pobierz