Humax HD Fox-T2 Digital Recorder Custom Oprogramowanie 1.02.20_mod/3.00
Typ pliku: Oprogramowanie.
System Operacyjny: AnyOS.
Nazwa pliku: HD_FOX_T2_1.02.20_mod_3.00.zip.
Bit: 32/64 Bit.
Licencja: Darmowa.
Opis
Poprawki:
– Automatically recover from repeated failed maintenance mode boots and revert to a normal boot;
– Display a ‘You are in RMA mode’ web page when in RMA mode (thanks to Black Hole for the idea);
– Check network connectivity to the package repository during bootstrap and display a more useful error message (thanks to Raydon);
– Upgrade embedded filesystem check and repair utilities to latest version (e2fsprogs 1.42.10);
– Include extundelete utility;
– Fix bug where aliased filesystem format/check utilities didn’t work (noted by Black Hole);
– Automatically remove Sky Player from flash memory if still present (Humax have removed this from newer firmware releases);
– New custom OS kernel with support for:
Large block devices;
EFI Partition tables;
Basic IP filtering (iptables).
– Unified installation image that can safely by applied on top of any existing version, custom or otherwise, in a single step;
– New USB packages available to:
Perform a factory reset;
Force a maintenance mode boot;
Remove all iptables rules (to recover if you lock yourself out).
– Available for the Humax HDR Fox-T2 versions 1.02.20, 1.02.32 and 1.03.12;
– Available for the Humax HD Fox-T2 versions 1.02.20 and 1.02.31.
Install Firmware:
– Pobierz oprogramowanie sprzętowe and, if it is a zip file, extract it
– Ensure the resulting file is named HD_FOX_T2_Upgrade.hdf
– Place the file in the root of a FAT32 formatted USB Flash / disk Drive *
– Put the unit into standby using the remote, or power button on the front
– Plug the USB Flash device into the USB port
– Turn on the TV and switch to the Humax input
– Press and hold down the power button on the front until you see the software update begin, and the progress is shown on the TV screen
– The initial download is very quick and then programming takes 2-3 minutes
– Pauses in the percentage time bar are quite normal
– When the update is complete End will appear on the front display and Success Downloading! will appear on the TV
– Unplug the USB Flash Device and delete the HD_FOX_T2_Upgrade.hdf file
– Reconnect a USB Flash / Hard Disk drive formatted in EXT2 / EXT3
– Press the power button on the front to restart with the new firmware
Uwaga:
The HD Fox T2 requires a USB Flash / Disk Drive with a minimum of 2GB to be connected when operating with Custom Firmware otherwise it will not be possible to install additional software packages, Flash devices must be formatted in EXT2 using a P.C. program such as GParted “Live” CD, Hard Disk devices can be formatted in EXT3 by the HD FOX T2
Some USB Flash / Disk Drives are reported not to work, The reason for this is not fully understood, However the following Tips are known to help:
– Ensure no other USB devices are connected
– Do not use a USB extender cable
– Removing all other files / full-formatting can prevent file fragmentation
– Try both USB ports (HDR)
– Smaller capacity drives seem to work more successfully than large ones
– Last Resort, Try a different USB Flash Drive
Pobierz