HP ProBook 430 G3 BIOS Update Narzędzie 1.06
Typ pliku: Narzędzie.
System Operacyjny: Windows 10, Windows 7, Windows 8, Windows 8.1.
Nazwa pliku: sp74289.exe.
Bit: 64 Bit.
Licencja: Darmowa.
Opis
Kluczowe cechy:
– Processor family: Intel Core i3 processor
– Processor: Intel Core i3-6100U with Intel HD Graphics 520 (2.3 GHz, 3 MB cache, 2 cores)
– Chipset: Chipset is integrated with processor
– Memory: 4 GB DDR3L-1600 SDRAM (1 x 4 GB)
– Memory slots: 2 SODIMM
– Internal drive: 500 GB 7200 rpm SATA
– Display: 33,8 cm (13.3”) diagonal HD anti-glare LED-backlit (1366 x 768)
– Graphics: Integrated Intel HD Graphics 520
– Ports: 2 USB 3.0, 1 USB 2.0 (power port), 1 HDMI, 1 headphone/microphone combo, 1 AC power, 1 RJ-45, 1 VGA
– Expansion slots: 1 multi-format digital media reader (supports SD, SDHC, SDXC)
– Audio: HD audio with DTS Studio Sound, Two stereo speakers, Integrated dual-microphone array, Headphone/microphone combo jack
– Camera: 720p HD webcam
– Keyboard: HP Premium Keyboard, full-sized, spill resistant
– Network interface: Realtek Ethernet (10/100/1000)
– Wireless: Intel Dual Band Wireless-AC 3165 802.11a/b/g/n/ac (1×1) WiFi and Bluetooth 4.0 Combo
This package creates files that contain an image of the System BIOS (ROM) for the supported notebook models with a N78 family ROM. This package is used to flash the System ROM on support notebook.
Compatible Notebooks:
– HP ProBook 450 G3 Notebook PC
– HP ProBook 430 G3 Notebook PC
– HP ProBook 440 G3 Notebook PC
– HP ProBook 470 G3 Notebook PC
ENHANCEMENTS:
– Provides improved TPM (Trusted Platform Module) activation policy.
– Fixes an issue which causes the system to stop functioning properly and display a black screen when the system resumes from sleep (S3) mode on a system where the Graphics Option is set to UMA (shared memory) in the F10 BIOS settings.
Aby zainstalować ten pakiet, wykonaj następujące czynności:
– Upewnij się, że spełnione są wszystkie wymagania systemowe.
– Zapisz pakiet do pobrania w dostępnej lokalizacji (np. Na pulpicie).
– Zlokalizuj i kliknij dwukrotnie nowo pobrany plik.
– Zezwól systemowi Windows na uruchomienie pliku (jeśli to konieczne).
– Przeczytaj Umowę licencyjną użytkownika końcowego (Umowa licencyjna użytkownika końcowego) i zgódź się kontynuować proces instalacji.
– Postępuj zgodnie z instrukcjami wyświetlanymi na ekranie.
– Zamknij kreatora i ponownie uruchom system, aby zmiany odniosły skutek.
Pobierz