Gigabyte GA-X58A-UD3R (rev. 2.0) Realtek LAN Sterownik 7.017 do Windows 7
Typ pliku: Sterownik.
System Operacyjny: Android, Windows 7.
Nazwa pliku: motherboard_driver_lan_realtek_8111_w7.exe.
Bit: 64 Bit.
Licencja: Darmowa.
Opis
CPU
1. Wsparcie dla Intel Core i7 series processor in the LGA1366 package
2. L3 cache varies with CPU
QPI
1. 4.8GT/s, 6.4GT/s
Chipset
1. North Bridge: Intel X58 Express Chipset
2. South Bridge: Intel ICH10R
Memory
1. 6 x 1.5V DDR3 DIMM sockets supporting up to 24 GB of system memory
2. Dual/3 channel memory architecture
3. Wsparcie dla DDR3 2200/1333/1066/800 MHz memory modules
4. Wsparcie dla non-ECC memory modules
5. Wsparcie dla Extreme Memory Profile (XMP) memory modules
Audio
1. Realtek ALC889 codec
2. High Definition Audio
3. 2/4/5.1/7.1-channel
4. Wsparcie dla Dolby Home Theater
5. Wsparcie dla S/PDIF In/Out
6. Wsparcie dla CD In
LAN
1. 1 x Realtek RTL8111E chip (10/100/1000 Mbit)
Expansion Slots
1. 2 x PCI Express x16 slots, running at x16 (PCIEX16_1/PCIEX16_2)
2. 2 x PCI Express x16 slot, running at x8 (PCIEX8_1/PCIEX8_2) (The PCIEX16_1, PCIEX16_2, PCIEX8_1 and PCIEX8_2 slots conform to PCI Express 2.0 standard.)
3. 2 x PCI Express x1 slots
4. 1 x PCI slot
Multi-Graphics Technology
1. Wsparcie dla 2-Way/3-Way ATI CrossFireX/NVIDIA SLI technology
Storage Interface
South Bridge:
1. 6 x SATA 3Gb/s connectors (SATA2_0, SATA2_1, SATA2_2, SATA2_3, SATA2_4, SATA2_5) supporting up to 6 SATA 3Gb/s devices
2. Wsparcie dla SATA RAID 0, RAID 1, RAID 5, and RAID 10
Marvell 9128 chip:
1. 2 x SATA 6Gb/s connectors (GSATA3_6, GSATA3_7) supporting up to 2 SATA 6Gb/s devices
2. Wsparcie dla SATA RAID 0, and RAID 1
GIGABYTE SATA2 chip:
1. 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
2. 2 x SATA 3Gb/s connectors (GSATA2_8, GSATA2_9) supporting up to 2 SATA 3Gb/s devices
3. Wsparcie dla SATA RAID 0, RAID 1, and JBOD
JMicron JMB362 chip:
1. 2 x eSATA 3Gb/s connectors (eSATA/USB Combo) on the back panel sup- porting up to 2 SATA 3Gb/s devices
2. Wsparcie dla SATA RAID 0, RAID 1, and JBOD
iTE IT8720 chip:
1. 1 x floppy disk drive connector supporting up to 1 floppy disk drive
USB
Integrated in the South Bridge
1. Up to 10 USB 2.0/1.1 ports (6 on the back panel, including 2 eSATA/USB Combo, 4 via the USB brackets connected to the internal USB headers)
NEC chip:
1. Up to 2 USB 3.0/2.0 ports on the back panel
IEEE 1394
1. T.I. TSB43AB23 chip
2. Up to 3 IEEE 1394a ports (2 on the back panel, 1 via the IEEE 1394a bracket connected to the internal IEEE 1394a header)
Internal I/O Connectors
1. 1 x 24-pin ATX main power connector Connectors
2. 1 x 8-pin ATX 12V power connector
3. 1 x floppy disk drive connector
4. 1 x IDE connector
5. 8 x SATA 3Gb/s connectors
6. 2 x SATA 6Gb/s connectors
7. 1 x CPU fan header
8. 3 x system fan headers
9. 1 x power fan header
10. 1 x North Bridge fan header
11. 1 x front panel header
12. 1 x front panel audio header
13. 1 x CD In connector
14. 1 x S/PDIF In header
15. 1 x S/PDIF Out header
16. 2 x USB 2.0/1.1 headers
17. 1 x IEEE 1394a header
Back Panel Connectors
1. 1 x PS/2 keyboard port
2. 1 x PS/2 mouse port
3. 1 x coaxial S/PDIF Out connector
4. 1 x optical S/PDIF Out connector
5. 1 x clearing CMOS button
6. 2 x IEEE 1394a ports
7. 4 x USB 2.0/1.1 ports
8. 2 x USB 3.0 ports
9. 2 x eSATA/USB Combo connectors
10. 1 x RJ-45 port
11. 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/ Side Speaker Out/Line In/Line Out/Microphone)
I/O Controller
1. iTE IT8720 chip
H/W Monitoring
1. System voltage detection
2. CPU/North Bridge temperature detection
3. CPU/System/Power fan speed detection
4. CPU overheating warning
5. CPU fan fail warning
6. CPU/System fan speed control
BIOS
1. 2 x 16 Mbit flash
2. Use of licensed AWARD BIOS
3. Wsparcie dla DualBIOS
4. PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b
Unique Features
1. Wsparcie dla @BIOS
2. Wsparcie dla Q-Flash
3. Wsparcie dla Xpress BIOS Rescue
4. Wsparcie dla Download Center
5. Wsparcie dla Xpress Install
6. Wsparcie dla Xpress Recovery2
7. Wsparcie dla EasyTune
8. Wsparcie dla Dynamic Energy Saver 2
9. Wsparcie dla Smart 6
10. Wsparcie dla Auto Green
11. Wsparcie dla eXtreme Hard Drive
12. Wsparcie dla ON/OFF Charge
13. Wsparcie dla Q-Share
Bundle Software
1. Norton Internet Security (OEM version)
Form Factor
1. ATX Form Factor; 30.5cm x 24.4cm
Ten pakiet zawiera pliki potrzebne do instalacji sterownika Realtek FE/GbE Controller LAN. Jeśli został zainstalowany, aktualizacja (instalacja nadpisująca) może rozwiązać problemy, dodać nowe funkcje lub rozszerzyć istniejące. Nawet jeśli inne systemy operacyjne mogą być kompatybilne, nie zalecamy stosowania tej wersji na platformach innych niż określone.
Aby zainstalować sterownik, wykonaj następujące czynności
– Zapisz i rozpakuj plik do pobrania.
– Zlokalizuj i uruchom plik wykonawczy „setup.exe” z nowo utworzonego folderu.
– Postępuj zgodnie z instrukcjami wyświetlanymi przez program setup.exe
UWAGA:
– Na platformach Windows Plug and Play adapter zostanie automatycznie zidentyfikowany i skonfigurowany. Proszę zatrzymać automatyczną instalację przez system Windows.
– Aby zainstalować sterownik, powinieneś mieć uprawnienia administratora.
– Jeśli wyświetlany jest zniekształcony tekst, użyj „AutoInst.exe”, aby ponownie zainstalować / odinstalować sterownik.
– Użycie „AutoInst.exe” jest takie samo jak „Setup.exe”.
Instalacja ręczna:
– Instalacja ręczna polega na zainstalowaniu sterownika za pomocą pliku instalacyjnego (INF), a nie na wspomnianym powyżej pliku „setup.exe”.
– Aby ręcznie zainstalować sterownik, otwórz Menedżera urządzeń, rozwiń listę drzewa Kart sieciowych, wybierz „Kontroler rodziny Realtek FE / Gbe” i kliknij prawy przycisk, uruchom element menu Aktualizuj sterownik … i postępuj zgodnie z kierunkiem aby wskazać ścieżkę pliku INF.
– UWAGA: Instalacja ręczna to rodzaj instalacji przez zaawansowanego użytkownika. Użytkownicy ogólni proszę użyć „setup.exe”, aby zainstalować sterownik.
Pobierz