Gigabyte GA-990FXA-D3 (rev. 1.x) Etron USB 3.0 Sterownik 105
Typ pliku: Sterownik.
System Operacyjny: Windows 7, Windows Vista, Windows XP.
Nazwa pliku: motherboard_driver_etron_usb3.exe.
Bit: 64 Bit.
Licencja: Darmowa.
Opis
CPU
AM3+ Socket:
– Wsparcie dla AMD AM3+ FX processors
– Wsparcie dla AMD AM3 Phenom II processors / AMD Athlon II processors
Hyper Transport Bus
– 5200 MT/s
Chipset
– North Bridge: AMD 990FX
– South Bridge: AMD SB950
Memory
– 4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory (Note 1)
– Dual channel memory architecture
– Wsparcie dla DDR3 2000(O.C.)/1866/1600/1333/1066 MHz memory modules (Note 2)
Audio
– Realtek ALC889 codec
– High Definition Audio
– 2/4/5.1/7.1-channel
– Wsparcie dla S/PDIF Out
LAN
– 1 x Realtek RTL8111E chip (10/100/1000 Mbit)
Expansion Slots
– 2 x PCI Express x16 slots, running at x16 (PCIEX16_1, PCIEX16_2) (Note 3)
– 2 x PCI Express x16 slots, running at x4 (PCIEX4_1, PCIEX4_2)
– 2 x PCI Express x1 slots
– 1 x PCI slot
Multi-Graphics Technology
– Wsparcie dla 2-Way AMD CrossFireX and NVIDIA SLI technology (PCIEX16_1, PCIEX16_2)
Storage Interface
South Bridge:
– 6 x SATA 6Gb/s connectors supporting up to 6 SATA 6Gb/s devices
– Wsparcie dla SATA RAID 0, RAID 1, RAID5, RAID 10 and JBOD
USB South Bridge:
– Up to 14 USB 2.0/1.1 ports (8 ports on the back panel, 6 ports available through the internal USB headers)
2 x Etron EJ168 chips:
– Up to 2 USB 3.0/2.0 ports on the back panel
Internal I/O Connectors
– 1 x 24-pin ATX main power connector
– 1 x 8-pin ATX 12V power connector
– 6 x SATA 6Gb/s connectors
– 1 x CPU fan header
– 2 x system fan headers
– 1 x power fan header
– 1 x front panel header
– 1 x front panel audio header
– 1 x S/PDIF Out header
– 3 x USB 2.0/1.1 headers
– 1 x Trusted Platform Module (TPM) header
– 1 x serial port header
– 1 x clearing CMOS jumper
Back Panel Connectors
– 1 x PS/2 keyboard/mouse port
– 1 x optical S/PDIF Out connector
– 8 x USB 2.0/1.1 ports
– 2 x USB 3.0/2.0 ports
– 1 x RJ-45 port
– 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker Out/Line In/Line Out/Microphone)
I/O Controller
– ITE IT8720 chip
H/W Monitoring
– System voltage detection
– CPU/System temperature detection
– CPU/System/Power fan speed detection
– CPU overheating warning
– CPU/System/Power fan fail warning
– CPU/System fan speed control (Note 4)
BIOS
– 2 x 32 Mbit flash
– Use of licensed AWARD BIOS
– Wsparcie dla DualBIOS
– PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b
Unique Features
– Wsparcie dla @BIOS
– Wsparcie dla Q-Flash
– Wsparcie dla Xpress BIOS Rescue
– Wsparcie dla Download Center
– Wsparcie dla Xpress Install
– Wsparcie dla Xpress Recovery2
– Wsparcie dla EasyTune (Note 5)
– Wsparcie dla Easy Energy Saver
– Wsparcie dla Smart Recovery
– Wsparcie dla Auto Green
– Wsparcie dla ON/OFF Charge
– Wsparcie dla Cloud OC
– Wsparcie dla 3TB+ Unlock
– Wsparcie dla Q-Share
Bundle Software
– Norton Internet Security (OEM version)
Form Factor
– ATX Form Factor; 30.5cm x 24.4cm
Notes
Note 1. Due to Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB.
Note 2. To support a DDR3 1866 MHz (and above) memory, you must install an AMD AM3+ CPU first.
Note 3. For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16_1 slot; if you are installing two PCI Express graphics cards, it is recommended that you install them in the PCIEX16_1 and PCIEX16_2 slots.
Note 4. Whether the CPU/system fan speed control function is supported will depend on the CPU/system cooler you install.
Note 5. Available functions in EasyTune may differ by motherboard model.
Zaleca się, aby zawsze używać najnowszej dostępnej wersji sterownika.
Nie zapomnij sprawdzać z naszą stroną tak często, jak to możliwe, aby być na bieżąco z najnowszymi sterownikami, oprogramowaniem i grami.
Spróbuj ustawić punkt przywracania systemu przed zainstalowaniem sterownika urządzenia. To pomoże, jeśli zainstalujesz niewłaściwy sterownik. Problemy mogą pojawić się, gdy urządzenie sprzętowe jest zbyt stare lub nie jest już obsługiwane.
Pobierz