Gigabyte G1.Sniper 2 (rev. 1.0) BigFoot LAN Sterownik 6.0.0.23
Typ pliku: Sterownik.
System Operacyjny: Windows 7, Windows Vista, Windows XP.
Nazwa pliku: mb_driver_lan_bigfoot.exe.
Bit: 64 Bit.
Licencja: Darmowa.
Opis
CPU
– Wsparcie dla Intel Core i7 processors/Intel Core i5 processors/ Intel Core i3 processors/Intel Pentium processors/Intel Celeron processors in the LGA1155 package
– L3 cache varies with CPU
Chipset
– Intel Z68 Express Chipset
Memory
– 4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory
* Due to Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB.
– Dual channel memory architecture
– Wsparcie dla DDR3 2133/1866/1600/1333/1066 MHz memory modules
– Wsparcie dla non-ECC memory modules
– Wsparcie dla Extreme Memory Profile (XMP) memory modules
Onboard Graphics Integrated Graphics Processor:
– 1 x HDMI port, supporting a maximum resolution of 1920×1200
Audio
– 1 x Creative CA20K2 chip
– Wsparcie dla Dolby Digital Live and DTS Connect
– Wsparcie dla X-Fi Xtreme Fidelity and EAX Advanced HD 5.0 technologies
– High Definition Audio
– 2/4/5.1/7.1-channel
– Wsparcie dla S/PDIF Out
LAN
– 1 x Bigfoot Killer E2100 chip (10/100/1000 Mbit)
Expansion Slots
– 1 x PCI Express x16 slot, running at x16 (PCIEX16)
* For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.
– 1 x PCI Express x16 slot, running at x8 (PCIEX8)
* The PCIEX8 slot shares bandwidth with the PCIEX16 slot. When the PCIEX8 slot is populated, the PCIEX16 slot will operate at up to x8 mode.
(All PCI Express x16 slots conform to PCI Express 3.0 standard.)
* To support PCI Express 3.0, you must install an Intel 22nm CPU.
– 2 x PCI Express x1 slots
(All PCI Express slots conform to PCI Express 2.0 standard.)
– 2 x PCI slots
Multi-Graphics Technology
– Wsparcie dla AMD CrossFireX/NVIDIA SLI technology
* The PCIEX16 slot operates at up to x8 mode when AMD CrossFireX/NVIDIA SLI is enabled.
Storage Interface
– 1 x Marvell 88SE9172 chip:
– 2 x SATA 6Gb/s connector (GSATA3_6, GSATA3_7) supporting up to 2 SATA 6Gb/s devices
– Wsparcie dla RAID 0 and RAID 1
Chipset:
– 2 x SATA 6Gb/s connectors (SATA3_0, SATA3_1) supporting up to 2 SATA 6Gb/s devices
– 3 x SATA 3Gb/s connectors (SATA2_2~SATA2_4) supporting up to 3 SATA 3Gb/s devices
– 1 x eSATA 3Gb/s connector (eSATA/USB Combo connector) on the back panel supporting up to 1 SATA 3Gb/s device
– Wsparcie dla RAID 0, RAID 1, RAID 5, and RAID 10
* When a RAID set is built across the SATA 6Gb/s and SATA 3Gb/s channels, the system performance of the RAID set may vary depending on the devices being connected.
USB Chipset:
– Up to 14 USB 2.0/1.1 ports (8 ports on the back panel, including 1 eSATA/USB Combo connector, 6 ports available through the internal USB headers)
2 x Etron EJ168 chips:
– Up to 4 USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB header)
Internal I/O Connectors
– 1 x 24-pin ATX main power connector
– 1 x 8-pin ATX 12V power connector
– 4 x SATA 6Gb/s connectors
– 3 x SATA 3Gb/s connectors
– 1 x CPU fan header
– 4 x system fan headers
– 1 x front panel header
– 1 x front panel audio header
– 1 x S/PDIF Out header
– 3 x USB 2.0/1.1 headers
– 1 x USB 3.0/2.0 header
– 1 x serial port header
– 1 x Trusted Platform Module (TPM) header
– 1 x clearing CMOS jumper
– 1 x heatsink LED power connector
– 1 x CPU overclocking button header
Back Panel Connectors
– 7 x USB 2.0/1.1 ports
– 1 x PS/2 keyboard/mouse port
– 1 x CPU overclocking button
– 1 x optical S/PDIF Out connector
– 1 x eSATA/USB Combo connector
– 1 x HDMI port
– 2 x USB 3.0/2.0 ports
– 1 x RJ-45 port
– 5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Side Speaker Out, Line In/Mic In, Line Out)
I/O Controller
– iTE IT8728 chip
H/W Monitoring
– System voltage detection
– CPU/System temperature detection
– CPU/System fan speed detection
– CPU overheating warning
– CPU/System fan fail warning
– CPU/System fan speed control
* Whether the CPU/system fan speed control function is supported will depend on the CPU/system cooler you install.
BIOS
– 2 x 32 Mbit flash
– Use of licensed AWARD BIOS
– Wsparcie dla DualBIOS
– PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b
Unique Features
– Wsparcie dla @BIOS
– Wsparcie dla Q-Flash
– Wsparcie dla Xpress BIOS Rescue
– Wsparcie dla Download Center
– Wsparcie dla Xpress Install
– Wsparcie dla Xpress Recovery2
– Wsparcie dla EasyTune
* Available functions in EasyTune may differ by motherboard model.
– Wsparcie dla Dynamic Energy Saver 2
– Wsparcie dla Smart 6
– Wsparcie dla Auto Green
– Wsparcie dla eXtreme Hard Drive (X.H.D)
– Wsparcie dla ON/OFF Charge
– Wsparcie dla Cloud OC
– Wsparcie dla 3TB+ Unlock
– Wsparcie dla TouchBIOS
– Wsparcie dla Q-Share
Bundle Software
– Norton Internet Security (OEM version)
– Intel Smart Response Technology
– LucidLogix Virtu
* Make sure the monitor cable has been connected to the integrated graphics port on the back panel.
Form Factor
– E-ATX Form Factor; 30.5cm x 26.4cm
Zaleca się, aby zawsze używać najnowszej dostępnej wersji sterownika.
Nie zapomnij sprawdzać z naszą stroną tak często, jak to możliwe, aby być na bieżąco z najnowszymi sterownikami, oprogramowaniem i grami.
Spróbuj ustawić punkt przywracania systemu przed zainstalowaniem sterownika urządzenia. To pomoże, jeśli zainstalujesz niewłaściwy sterownik. Problemy mogą pojawić się, gdy urządzenie sprzętowe jest zbyt stare lub nie jest już obsługiwane.
Pobierz