Flowserve Limitorque QX Actuator Oprogramowanie 16Q04_01.s19
Typ pliku: Oprogramowanie.
System Operacyjny: AnyOS.
Nazwa pliku: QX_APP_FULL_RELEASE_16Q04_01.7z.
Bit: 32/64 Bit.
Licencja: Darmowa.
Opis
Update Firmware:
IR Port Activation
– Enter the SETUP Menu
– Toggle “NO” to all menu options until “CHANGE PORT” is displayed, then toggle “YES”
– Enable the IRDA port, and then exit SETUP
– In the MX actuator, the default setting for the diagnostic ports is IRDA is disabled and Local Port is enabled. In the MXa, QX and UEX, the default setting is IRDA and Local Port enabled.
Port Management
– When using a USB to Serial converter, it is important to know what communication port is assigned to the USB port being used. This can be accomplished in 2 ways. The first method is when using the SeaLevel 2105 USB to Serial Convertor. This convertor comes with a SeaCOM Port Manager software program that will display the port assignments for the computer. The other method is by using the Device Manager in the System section of the Control Panel.
SeaCOM Port Manager
– Install the Port Manager software following the directions included.
– Plug the converter into any USB port
– Open the Port Manager program Start > All Programs > SeaCOM > Port Manager
– The user interface will display the port assignments
– Notice that in this example, the SeaLINK+232 USB to RS-232 Converter is assigned to communication port 6.
– When opening any utility (software downloader, Modtest, Dashboard, etc.) insure that the port selection on the utility interface matches the port assignment for the converter
Windows Device Manager
– Plug in the converter to any USB port
– Install any software that accompanies the device
– Let Windows install the device
– Open the Windows Device Manager
– Start > Control Panel > System
– Select the “Hardware” tab
– Toggle the “Device Manager” button
– Expand the Ports (COM & LPT) tree
– The port assignments are displayed
– Notice that in this example, the SeaLINK+232 USB to RS-232 Converter is assigned to communication port 6.
– When opening any utility (software downloader, Modtest, Dashboard, etc.) insure that the port selection on the utility interface matches the port assignment for the converter
Pobierz