Cuddeback Capture Camera Oprogramowanie 02 09
Typ pliku: Oprogramowanie.
System Operacyjny: AnyOS.
Nazwa pliku: Capture_Firmware_Update_0209.exe.
Bit: 32/64 Bit.
Licencja: Darmowa.
Opis
Poprawki:
– SDHC memory cards up to 16GB can now be used in the Capture series cameras.
Update process:
1) You will need an SD card installed into your computer’s SD card reader or slot.
2) Pobierz oprogramowanie sprzętowe .
3) If you saved the firmware to your SD card in step 2 you can skip this step. If you did not save the firmware files to your SD card you will need to copy the firmware files to an SD card. Use your computers commands to move the *.FW files to your SD card.
4) Remove the SD card from your computer and insert the SD card into the Cuddeback camera.
5) Turn the rotary knob to MENU.
6) Press the A button a few times until LOAd is displayed.
7) Press the B button.
8) You will see the LED flash RED. The LCD will show the worm scrolling around. DO NOT REMOVE THE SD CARD.
a.Note: if EC:02 is displayed the batteries are too weak to install the new firmware. Replace the batteries then perform the LOAd function again.
b.Note: if EC:10 is displayed the firmware files are not on the SD card or the SD card is not installed correctly.
9) After about 10 seconds the LCD will display some numbers and then the battery level. This is your indication that the firmware update was successful.
10) You have successfully updated and improved your camera.
11) You can remove the SD card and use the same SD card to update additional cameras if needed. Or, you can continue to use the SD card in your camera.
Pobierz