Creative Sound Blaster X7 Oprogramowanie 150918
Typ pliku: Oprogramowanie.
System Operacyjny: Windows 10, Windows 7, Windows 8, Windows 8.1, Windows Vista.
Nazwa pliku: SBX7_PCFW_EN_150918.exe.
Bit: 64 Bit.
Licencja: Darmowa.
Opis
What’s New:
– Increase standby duration to 72 hours before entering suspend mode (Power LED off)
Poprawki:
– Intermittent firmware upgrade failure
– Auto shutdown during audio playback from Line In/Optical In
– Intermittent noise from Line In left channel
– USB Host compatibility with Sony Xperia Z Ultra, Sony Xperia Z3 and XiaoMi Mi3
– Left channel audio break when calibration of speaker distance is set below 2.2m
– Inaudible Bluetooth audio after streaming audio via USB Host for more than 30 minutes
– Bluetooth LED not blinking in pairing mode if there is an existing connected device
– Inaudible Bluetooth audio when pairing to a second device
– Unable to connect to a second Bluetooth device if an existing connected device has been streaming for more than 30 minutes
– Headphones not detected when first inserted
– X7 Control app running on iOS 9 unable to connect to Sound Blaster X7
To install the firmware, do the following:
– Download the file onto your local hard disk.
– Ensure that your device is connected to your computer.
– Double-click the downloaded file.
– Follow the instructions on the screen.
– Upon successful firmware upgrade, shut down your device by pressing the Power button (LED off).
– Switch off the main power supply to the power adapter and unplug the power cable from your device.
– After 10 seconds, plug the power cable back into your device and switch on the main power supply.
– Turn your device back on by pressing the Power button (LED on).
OSTRZEŻENIE:
– Please ensure that the driver is installed before running the firmware upgrade.
– Do not unplug your device or restart your PC until full installation is completed.
Pobierz