Buffalo TS5400RN NAS Oprogramowanie 3.70
Typ pliku: Oprogramowanie.
System Operacyjny: Windows 10, Windows 7, Windows 8, Windows 8.1, Windows Server 2003, Windows Server 2008, Windows Server 2012, Windows Vista, Windows XP.
Nazwa pliku: TS5000_series_FW_3.70.zip.
Bit: 64 Bit.
Licencja: Darmowa.
Opis
Added and Modified Features
– [Dropbox Sync] Added to verify an SSL certificate for the proxy server.
– [Cloud Storage] Modified so that a region can be selected when configuring settings with Amazon S3. If you can’t access a bucket and its region is blank, try configuring the region.
– [Cloud Storage] Modified so that unexpected downloads do not occur after the cloud storage service is disabled and then enabled.
Bug Poprawki:
– [SMB] Fixed a bug where a shared folder could not be accessed by a “guest” user.
– [Backup] Fixed a bug where a backup error was not displayed when the backup job was canceled due to any settings changes made while the backup job was running.
– [Dropbox Sync] Fixed a bug where the folder list could not be updated if Dropbox contains 40 or more folders.
– [Cloud Storage] Fixed a bug where an backup error occurred when backup was enabled.
– [Cloud Storage] Fixed a bug where the upload speed may become slow when cloud storage is configured.
Before updating the firmware:
– Do not turn off the TeraStation until the firmware update is complete and the “finished” message is displayed.
– USB drives may not be mounted automatically after updating the firmware. To mount them, unplug and then reconnect them.
– Disconnect iSCSI volumes with the iSCSI Initiator before updating the firmware.
– Make sure the TeraStation’s Ethernet frame size is smaller than the hub or router’s. Larger frame sizes may not transfer the data to the TeraStation correctly.
– If an external USB drive is configured as a target for TeraStation backup, the drive should be formatted with ext3, XFS, or FAT32. Do not use an NTFS-formatted drive as a backup target or unexpected behavior may result.
– If a “Replication I33 ReplicateFailure” error occurs, navigate to ‘Backup’ – ‘Replication’ and click ‘Run Differential Backup’.
– If a “I33 ReplicateFailure” replication error occurs, navigate to ‘Backup’ – ‘Replication’ – ‘Edit Failover Status’ and click ‘Sync’.
How to Update the Firmware:
– Connect the TeraStation and a computer to run the updater on the same network subnet. The subnet masks should be the same and the first three numbers of the IP addresses should be the same. The last number of the IP addresses should be different.
– Exit all applications. Also, stop or exit any firewall software.
– Extract the downloaded file and run “TSUpdater.exe”. When a TeraStation is detected, an update window will open.
– If multiple TeraStations are connected to the network, select which TeraStation to update.
– Click ‘Update’ and enter the TeraStation’s administrator password.
– Click ‘OK’.
– It will take several minutes for the firmware to update. During the update process, the info LED will blink. Don’t disconnect or power down the TeraStation until the update is finished.
– When the update is finished, a message will be displayed.
Pobierz