Arturia KeyLab 88 Keyboard Controller Oprogramowanie 1.2.0.5
Typ pliku: Oprogramowanie.
System Operacyjny: AnyOS.
Nazwa pliku: KeyLab88_Firmware_Update_1_2_0_5.led.
Bit: 32/64 Bit.
Licencja: Darmowa.
Opis
New Features
– Edit a 5-point velocity curve from the KeyLab 88 or the MIDI Control Center
– All parameters are accessible in the Param Edit mode of the KeyLab 88
Fixed Bugs:
– Aux pedal is now editable in menu browsing
– Aux pedal is in Control mode (continuous) instead of Switched Control mode (on/off)
– MMC controls in the MIDI Control Center are not mixed up anymore
– No more stuck notes when recalling a memory while a key is being pressed
– SOUND is lit at start-up instead of MULTI
– No more pads double trigs
– LCD dimming now works with all units
KeyLab firmware Update:
– Download the Latest Firmware
– Plug the KeyLab
– Launch the Midi Control Center
– Wait until the keyboard has been recognized by the Computer. The MCC will prompt the Version of the Firmware or the message :
“Keyboard Problem
The keyboard has not been detected”
– Click on Upgrade Firmware button
– Follow the instruction of the reboot alert.
– Next Step:
Unplug the KeyLab
Hold the “Sound”, “Multi”, “Edit” key
Plug the KeyLab
Wait during 5 seconds.
The “Update” Message is showing onto the Screen
– Click “OK” on the “reboot alert”, and choose the Firmware file
– Progress bar…
– Confirmation message (Click 'OK’)
– Close the Midi Control Center.
– Reset to default
Press both octave buttons
Power up the keyboard
Pobierz