Ubiquiti PicoStation M2HP WiFiCloudNet Firmware
Tipo di file: Firmware.
Sistema Operativo: AnyOS.
Nome del file: wcn-v1-picom2hp.bin.
Bit: 32/64 Bit.
Licenza: Gratis.
Descrizione
Features:
– Powerful Cloud Managed System
– No On-site Wireless LAN Controller required
– Enables Wireless Mesh to Multi Vendor’s Access Point
– Two SSIDs, Public and Private SSID
– Captive Portal with Bandwidth Control System and Voucher
– Custom Splash Page support to Market your own Brands
– Radius Support
– Safe and Secure
– Protect your SSIDs with WPA Keys, AP Isolation and LAN block Feature which prevents user to see each others
– Auto Outage Alerts based on Network
– Real time Network Statistics for individual devices
– Over-the-Air Firmware upgrade
– Custom Script features
Install WiFiCloudNet Firmware:
– Power off the PicoStation M2HP
– Windows PC’s Ethernet must be configured manually with the following settings
– IP Address: 192.168.1.254, Subnet Mask : 255.255.255.0
– Connect your PicoStationm2hp device to your PC
– Keep holding the reset button, then power the unit on. Wait 8 seconds then release the button. Signal LEDs will be lit indicating that the device is ready to receive the firmware
– Make sure that PicoStation M2HP device responds to pings (perform a ping 192.168.1.20 from a DOS window), if it does not, go back to the first step
– From Windows PC, you can use TFTP command line from a DOS window (START COMMAND PROMPT) and go into the same directory where you stored the firmware. Run following command tftp -i 192.168.1.20 put wcn-v1-picom2hp.bin
– Wait for a while to allow the device to reboot – do not power off the device during the procedure. It will take a DHCP IP address, if a DHCP server is available; otherwise it will take the 192.168.66.1 fallback IP address
– Now your PicoStation M2HP is ready to add in your account with wificloudnet.com
Download