SIGMA fp Camera Firmware 1.01
Tipo di file: Firmware.
Sistema Operativo: AnyOS.
Nome del file: FP__V101.BIN.
Bit: 32/64 Bit.
Licenza: Gratis.
Descrizione
Correzioni:
– The firmware will correct the phenomenon when the recording to the external SSD drive. Regardless of the recording bit and frame rate part of the first and second frames of playback will be enlarged as well as the thumbnail images when the recording format is set to Cinema DNG and the resolution is set to UHD.
– The firmware will correct the phenomenon whereby shooting in the Cinema DNG format, depending on the ISO sensitivity the level of the dark area changes for each frame.
– The firmware will correct the phenomenon whereby some parts of the recorded video become disordered.
– The firmware will correct the phenomenon whereby the camera freeze when the lens firmware is updated through files downloaded via Mac.
Caution (Firmware update):
– If the camera is turned off during the update procedure, it might cause a malfunction and damage your camera.
– Please use a dedicated AC adapter or a fully charged battery.
– Do not open the BATTERY/CARD COVER or operate the camera during the firmware update.
– Do not turn off the camera during the firmware update.
How to update the firmware:
– Use SD/SDHC/SDXC card and format the card in the camera body.
– Please connect a card reader containing the SD/SDHC/SDXC card or the camera to your computer and download the firmware file in the SD/SDHC/SDXC card root directory (Please do not store the file in a subfolder such as “DCIM”).
– Insert the SD/SDHC/SDXC card storing the firmware file of .BIN into your camera and turn on the camera.
– Press the MENU button on the back of the camera to display the Camera Set-up Menu.
– Select “Firmware Update” from the Set-up Menu.
– Press the OK button again to display the firmware update window.
– The installed firmware information is displayed.
– “Start Firmware update?” message will be displayed.
– Select “Yes” and then press the OK button to start the firmware update. Firmware update will now start.
– There will be two firmware updates. 5 seconds after starting the first update, the camera body will turn off automatically, and 3 seconds later it will turn on again to start the second update. In case the camera does not restart, turn on the power to resume the update. It takes about 1 minute as a total to update.
– When the message “Firmware update is complete. The camera will be turned off automatically.” is displayed, the update is complete.
– Select the “Information” from the Set-Up menu and confirm the firmware has been updated to successfully.
Download