Panasonic WV-X6531NS Network Camera Firmware 4.30
Tipo di file: Firmware.
Sistema Operativo: AnyOS.
Nome del file: x6531_430ES.zip.
Bit: 32/64 Bit.
Licenza: Gratis.
Descrizione
Changes/Correzioni:
– Added “SNMP trap setting” in [Network] > [Advanced] > [SNMP]
– Added a CGI command “/cgi-bin/setup_menu_disp?25fps=1” to make 25/50fps selectable on the “Image capture mode” menu.
– Private zone setting / Patrol setting: changed the image display format from JPEG to H264/ H265 to make it easier to check the changes on the image.
– Improved the response speed of the ONVIF command related to PTZ preset
– Live image may not be displayed and keeps showing warming-up warning
– All sessions get disconnected by executing the ONVIF commands for changing the framerate and the resolution.
– Changed the date character string format for response which responds via SNMP to “DateAndTime” format as it was not transmitted correctly.
– Supports multi-browsers Google Chrome, Firefox and Microsoft Edge in addition to Internet Explorer for playing back the images on SD memory card
– Changed the URL, QR code and Data_Matrix linked to the support page on the “Support” menu.
– Manual recording may not work outside of “Access permission” hours on “Schedule”.
– Installing “CA certificate” opens two installation screens, a small window and a tab.
– On the “/cam” window for mobile terminal, reloading the image will show the normal live images when the camera is switched to the “Access permission” period from inaccessible period.
– Improved the response when reconnecting in HTTPS connection on Windows 10.
– Selecting the image capture size on the “Image” tab may change the bit rate to 3Mbps.
– Changed the default value of ONVIF DefaultPTZTimeout from 2 seconds to 60 seconds.
– Corrected the coordinate of the transmitted contents in ONVIF Metadata.
– Enhanced the access restriction function of SNMP v1/v2.
– Fail in acquiring the setting data
– Fail in upgrading firmware
– Auto-pan does not stop at the time set to stop
– Enhanced security.
– Changed the below default setting: [Internet mode]: from “OFF” to “ON”
– The camera may not record the images in an SD memory card.
– Changed the company name in the plug-in software Active X to the new one.
Updating a camera’s firmware
– Download the latest firmware file and save it on your PC.
– Click the [Maintenance] tab.
– On the left side of the screen under [Maintenance], click [Update Firmware].
– Click [Update Firmware]. The camera will automatically restart.
– After the camera restarts, a dialog prompts you to select the firmware file.
– Click [Browse…]. A dialog prompts you to specify the location of the firmware file.
– Select the firmware file you downloaded from the Panasonic Network Camera website and click [Open]. The selected file name is displayed.
– Confirm the file name, then click [Update Firmware].
– The [Updating firmware.] screen is displayed, and then the [Restarting now…] screen is displayed.
– When the firmware update is complete, the camera’s top page is displayed.
– You can confirm the camera’s firmware version on the top page.
– Confirm the camera’s new firmware version on the top page.
– Do not turn off the power during a firmware update.
– All images buffered in the internal memory are deleted when the firmware is updated.
– All alarm logs are deleted when the firmware is updated.
– You can also use the Setup Program to update the camera’s firmware.
– The camera’s current firmware version can be confirmed on the [Top] page and the [Status] page.
– It might take ten minutes or more to update the firmware according to the network conditions.
Download