Panasonic WV-NS950 Network Camera Firmware 1.64
Tipo di file: Firmware.
Sistema Operativo: AnyOS.
Nome del file: ns950_164E0.zip.
Bit: 32/64 Bit.
Licenza: Gratis.
Descrizione
specifiche tecniche:
– Super Dynamic III technology delivers 128x wider dynamic range compared to conventional cameras.
– High sensitivity with Day-Night function: 0.5 lux (Color) at F1.4 (WIDE), 0.04 lux (B/W) at F1.4 (WIDE). IR cut filter switches on and off to ensure optimal picture quality in both color and B/W.
– Adaptive Digital Noise Reduction: 2D-DNR and 3D-DNR integration ensures reduced noise and motion blur in various conditions.
– Electronic sensitivity enhancement: Auto (Up to 32x) / OFF
– 30x zoom lens: 3.8 mm ~ 114 mm (approx. 300x with digital zoom).
– Pan/Tilt speed of max. 400°/s at preset mode and 0.065°/s super fine control at manual mode
– Auto tracking: The camera automatically pans and tilts to follow a moving subject and keep it in the center of the image.
– Built-in Video Motion Detector with 4 programmable detection areas and 6 sensitivity levels
– Scene Change Detection alarms when lens is covered, spray painted, removed or defocused.
– Various I/O terminals: ALARM IN 1 / BW IN, ALARM IN 2 / ALARM OUT, ALARM IN 3 / AUX OUT
– Alarm sources include Terminal 1 ~ 3, VMD and Panasonic alarm command. Alarm actions include Preset positions 1 ~ 256, PATROL 1 ~ 4,
– SD memory recording, FTP image transfer, E-mail notification, Indication on browser, Terminal output, Panasonic protocol output and Auto track.
– Auto image stabilizer for applications where vibration or wind is a concern
– Camera title display: 16 alphanumerics OSD and 20 alphanumerics on the browser
– Digital Slip-ring Transmission: The high speed digital video signal supplied by the Super Dynamic III DSP travels through the compact slip-ring without any DA/AD conversion process preventing image quality loss.
– Built-in MPEG-4/JPEG digital signal output at VGA image size with up to 30 ips
– MPEG-4 and JPEG dual stream output for simultaneous live monitoring and high resolution recording
– Progressive output with motion adaptive interlace/progressive conversion allows every image to be clear even when the object is moving.
– PTZ control can be made on the user-friendly GUI with 16 speeds pan/tilt and new “Drag and Zoom” operation enabling finer control.
– 256 speeds available for system with WV-CU950 system controller.
– 360° map shot: 8 thumbnail images at 45° intervals make it simple to direct the camera by clicking on a thumbnail.
– Multiscreen: Image from 16 cameras can be displayed in 4 different Quad screens or 16-screen (JPEG only).
– FTP client function enables periodic image data transfer or transfer upon alarm.
– Alarm notification via e-mail
– Full duplex 2-way audio allows interactive communication between camera site and monitoring site.
– Alarm log, Manual REC log, FTP error log saved in the SD memory card is displayed on the browser GUI and can be downloaded to the client PC.
– Playback or Image data download through the log is also available.
– Multi-language GUI and setup menu: English, French, Italian, Spanish, German, Russian (PAL), English, French (NTSC), (Installation required except for English).
– SD memory card slot for Manual recording, Alarm recording and Backup upon network failure
– Scheduling function for Alarm / VMD / Access permission, Preset position call and Position refresh
– IP66 rated water and dust resistant. IEC60529 measuring standard compatible.
– Built-in fan/heater/sun shield for temperature changes of –40 °C ~ +50 °C (–40 °F ~ +122 °F).
Download