OWC Mercury 6G SSD Firmware
Tipo di file: Firmware.
Sistema Operativo: AnyOS.
Nome del file: OWCFWUP10.0C.zip.
Bit: 32/64 Bit.
Licenza: Gratis.
Descrizione
This Firmware is for the following OWC Mercury SSD Models:
– Extreme Pro
– Extreme Pro RE
– Extreme Pro 3G
– Extreme Pro 6G
– Aura Pro*
– Aura Pro MBA
– Aura Pro 1.8
– Aura Pro 6G
– Electra 3G
– Electra 6G*
*Not including 960GB models
Instructions:
– Be sure you have a backup of ALL critical data.
– Verify what OWC SSD generation and firmware you are using
– Restore image to 2GB or greater USB Flash drive (formatted Master Boot Record and FAT) or burn image to DVD using Apple Disk Utility.
– Plug in the USB drive or insert the disc into the Mac with the installed SSD to be updated.
– Please power down and disconnect all external storage devices attached to your system.
– Reboot the system while holding down the option key.
– Select the USB icon labeled “EFI Boot”.
– The utility will boot to a selection list, where you can choose your machine model ID.
– The utility can take up to 2 minutes to load.
– Once loaded, review and agree to the Software License Agreement.
– The utility will automatically identify your drives.
– Select the drive to be updated.
– If your SSD requires an update click the Update button.
– After the update is complete/successful you will be prompted to Shutdown.
– At this point you can power up your machine and continue typical use.
NOTA:
– If your OWC SSD Firmware revision contains xxxA12F0 or xxxA13F0, then xxx365A12F0 or xxx365A13F0 is the most up-to-date revision, current as of October 20, 2011.
– If your OWC SSD Firmware revision contains xxxABBF0, then 603ABBF0 is the most up-to-date revision, current as of March 30, 2015.
Download