Naim Audio UnitiServe Disk Player Firmware 1.7a
Tipo di file: Firmware.
Sistema Operativo: AnyOS.
Nome del file: 1.7a-Updater.zip.
Bit: 32/64 Bit.
Licenza: Gratis.
Descrizione
Correzioni:
– Rip/convert to FLAC, MP3 shadow-encoding, set share-scanning schedules, iRadio over UPnP
– Please note: the hard disk player/server must already be on version 1.6d before updating.
Version 1.7a Upgrade:
IMPORTANT: Under no circumstances should an HDX be switched off during firmware upgrade procedures. If a firmware upgrade is interrupted before it is complete it is likely that the HDX will have to be returned to Naim Audio for repair.
IMPORTANT: If you are using the Naim Desktop Client application the existing version must be un-installed and the version provided on the 1.7a ISO Disk Image installed instead.
1. Ensure that the HDX network connection is working. Switch on the HDX and wait for the Home Menu to be displayed.
2. Check that the firmware version reported in the System Status screen (Home > System Setup > System Status > Overall Version) begins with 1.6g.
3. Insert the Version 1.7a Upgrade CD and close the drawer.
4. The HDX will read the upgrade CD. This will take about one minute.
5. DO NOT SWITCH OFF THE HDX WHILST THE UPGRADE IS IN PROGRESS.
6. The CD will be ejected when it has been read. Remove the CD from the drawer but leave the drawer open.
7. After a short while (several seconds) the Home Menu will disappear and a Please Wait message will be displayed. If this doesn’t happen within ten minutes, do not re-insert the upgrade disc – contact your Naim dealer.
8. After approximately twenty minutes the unit will re-start and display the Home Menu.
9. Switch the unit into shutdown mode from the remote handset.
10. Re-start the unit by switching the power off and on.
11. Check that the firmware version reported in the System Status screen (Home > System Setup > System Status > Overall Version) begins with 1.7a.
Download