Linksys WRT54GL Router Tarifa Firmware 034 RC1
Tipo di file: Firmware.
Sistema Operativo: AnyOS.
Nome del file: Tarifa034RC1.zip.
Bit: 32/64 Bit.
Licenza: Gratis.
Descrizione
Tarifa is a replacement firmware for the Linksys WRT54GL gateway/router. It adds a list of features, solves bugs and increases range and speed.
Changelog
Added:
(b000) rc_startup en rc_shutdown in webpage
(b001) passwd security for logon to Linux
(b002) telnetd
(b003) full wds support with easy setup webpage
(b004) wds bridge to Lan mode
(b002) Tx-power setting in webpage (251 mw)
(b010) Tx-antenna and Rx antenna diversity setting in webpage
(b004) static dhcp in webpage
(b010) RSSI list for both WDS and Clients, TSSI, Txpower and Rate indicator to wireless-status webpage
(b010) sysinfo to Router-status page: uptime, loads and kernel memory usage.
(b010) Reboot button to Administration-management page
(b010) Loopback enable/disable option to Administration-management page
(b018) Firmware Upgrade support for wrt54g, wrt54gl and wrt54gs firmware
(b026) support for wrt54g model v1 to v4, wrt54gl v1.0 and v1.1, wrt54gs v1 to v3 and wrt54gs v4
(b030) Remote syslog option to Administration-management page
(b032) UPnP / inactive rule cleaning option
(b033) UPnP / secure mode option
(b033) UPnP / seperate NAT-PMP and UPnP enable/disable option
(b033) UPnP / GENA protocol
updated:
(b022) busybox 0.6 to 1.1.2
(b013) squashfs 2.0 to 2.2-r2
(b014) mksquashfs 2.0 to 2.1 (indexed, 64 kbyte block size)
(b027) Netfilter / connection Tracking Remote DoS, CVE: CAN-2003-0187
(b027) Netfilter / NAT Remote DoS, CVE: CAN-2003-0467
(b034) Netfilter, TCP and route / flaw in several hash table implementations in networking code: CAN-2003-0244
(b028) Netfilter / iptables 1.2.7a to 1.3.5
(b032) MiniUPnPd , see: http://miniupnp.free.fr/
(b033) dnsmasq 1.10 to 2.45, cachesize increased from 150 to 2048
solved:
(b028) incoming log, this doesn’t work in the original firmware
(b013) webpage loading problem due java-script error for Ubuntu/Firefox/konqueror/etc
(b023) Bridge Restict mode change after boot
(b034) module ctmisc loading error (only wrt54gl v1.1)
changed:
(b009) port forwarding from 10 to 20 input fields
(b034) Netfilter / increased size of hash-table to 2048, in case of a wrt54gs (32MByte RAM) to 8192
(b034) Netfilter / CONNTRACK set to maximum of 2048 connections, in case of a wrt54gs (32MByte RAM) to 8192 connections
(b034) Netfilter, TCP and route / Bob Jenkins Jhash lookup3 Algoritm
(b034) IP / routing cache hash table of 8192 buckets, in case of 32MByte 16384 connections
Firmware upgrade instructions:
1) Before you start, be sure you are using a PC that is connected to the WRT54G via a wired (Ethernet) connection.
2) Open your web browser (e.g., Internet Explorer, Netscape, etc.)
3) In the Address bar, type in the IP address of your router. The default IP
address is 192.168.1.1.
4) Leave the username blank and enter your password. The default password is “admin”, all lower case.
5) Click on the Administration tab.
6) Click on Firmware Upgrade.
7) Browse for the firmware file that you have just extracted. The file name should end in .bin
8) Click the Upgrade button.
9) The router will begin its upgrade routine. Do not power off or unplug the router until the process is completed. This process may take up to 5 minutes to complete.
Download