Kramer VP-731 Presentation Scaler-Switcher Firmware 1.11 Master
Tipo di file: Firmware.
Sistema Operativo: AnyOS.
Nome del file: vp-730_731_fw_1.11.zip.
Bit: 32/64 Bit.
Licenza: Gratis.
Descrizione
The following changes were made in this version:
Added:
– When polling commands were sent continuously via RS-232 the audio stopped working and the information menu showed an audio version of 0.0.
Firmware Upgrade Procedure
1. Acquire xxx.brec file with the required version of firmware.
2. Copy this file to the route directory on any USB readable memory device (disk-on-key, flash memory card etc.).
3. Plug the device with the firmware file into USB connector of the VP728/729 and switch osan the scaler.
4. Wait until the scaler boots up and then use OSD menu to navigate to Setup>Advanced Setup>Misc>Firmware Download
5. Use UP and DOWN arrows to highlight the required firmware file and press ENTER button.
6. Confirm the upgrade and wait until progress indicator gets to 100%.
7. Restart the scaler by recycling the power.
Download