Intel S2600WT Server Board BIOS/Firmware 1.01.0008
Tipo di file: Firmware.
Sistema Operativo: AnyOS.
Nome del file: s2600wt_efi_biosr01_01_0008_me030007154_bmc01187601_frusdr106.zip.
Bit: 32/64 Bit.
Licenza: Gratis.
Descrizione
Changes in System BIOS 01.01.0008:
– The boot devices will increase if system reboot from RHEL7 aware UEFI and then the system will hang at high proportion
– SUT can’t boot to RHEL 6.5 x64 when enable “VT for Directed I/O” in BIOS setting.
– Driver Health Protocol (DHP) not working correctly on Wildcat Pass
– Incorrect ACPI table causes NUMA issues in Linux
– System booted with only 1 QPI link trained, no errors reported
– Dual port IB IOM G52882-351 is showed as “single-port” description in BIOS setup menu.
– Display L2/L3 cache error detected on the RAID controller during post
– uEFI iSCSI boot configuration is lost after reboot
– New ESRT2 OpROM and uEFI Driver for Grantley
– New ESRT2 1.43 OpROM for inclusion into Grantley Production BIOS
– SMBIOS problem cause the latest IDA7.17.RC6 boot failure with the 12G SAS RS3LC bridge
– If Unplug USB scanner and then re-plug scanner back in ,USB scanner is inactive
– Secondary SATA info loading before Primary SATA info
– CCB 273: QRE: Reset after CATERR leaves system in a hung state” is open for annotation
– Pressing multiple F6 from SOL skips through boot manager.
– BIOS isn’t reporting QPI link errors.
– Help text “Intel ESRT2 (LSI)” RAID mode not match with BIOS.
– TPM2.0 module can’t work
– [SMBIOS] Type 8 no information for NGFF (M.2) device
– Syscfg_v13.1.4:a lot of invalid BIOS items displayed in syscfg.ini by command:syscfg /s syscfg.ini /f /b
– Sysinfo_v13.1.5:a lot of invalid BIOS items displayed at ‘BIOS Settings’ part in sysinfo_log.txt by command:sysinfo -ni
– USB Scanner can’t work stably in EFI shell with Bios 691
BIOS Workaround for CWP 10G NIC OpROM issue:
– Roll back PXE OpROM V2.3.30 and UEFI V4.5.19 update
– Remove 1.43 UEFI ESRT2 OpRom
– Security Fix: Smm range check for signed update
versioni:
– System BIOS – R01.01.0008
– ME Firmware – 03.00.07.154
– BMC Firmware – 01.18.7601
– FRUSDR – 1.06
Download