Intel R2208WT2YS Server System BIOS/Firmware 1.01.0029
Tipo di file: Firmware.
Sistema Operativo: AnyOS.
Nome del file: S2600WT_EFI_BIOS_R01.01.0029_ME_030103072_BMC_0160r12335_FRUSDR_119.zip.
Bit: 32/64 Bit.
Licenza: Gratis.
Descrizione
versioni:
– System BIOS – 01.01.0029
– ME Firmware – 03.01.03.072
– BMC Firmware – 01.60.12355
– FRUSDR – 1.19
– iFlash32.efi – Version 14.1 Build 15
– fwpiaupd.efi – Version 14.1 Build 18
– frusdr.efi – Version 14.1 Build 18
System Firmware Update Package Usage instructions
This package can be updated using one of the following methods:
– Windows or Linux operating system using Intel One-boot Flash Update (OFU) V13.1 Build 13
– Windows Preboot Execution Environment (WinPE)
To update from Windows and Linux or operating systems using the Intel One Boot
– Flash Update Utility (OFU)
Use OFU to update system firmware by the following steps:
– Install OFU on Windows or Linux system
– Download the latest firmware update package from http://downloadcenter.intel.com/
– Unzip package to a folder
– Run the following command in Windows command line/Linux terminal window: <OFU install folder name>:flashupdt -u <package folder name>flashupdt.cfg
To update from Windows Preboot Execution Environment (WinPE)
The System Firmware Update Package can be inserted to Windows PE customized image for creating a bootable Windows PE CD. User is able to update system firmware from customized WinPE CD by the following steps:
– Boot server with customized WinPE CD
– Run script “WinPE21_x64_Update.bat” or “WinPE20_x86_Update.bat” (name may be varied depends on your own customization)
Update Procedure:
– Unzip the contents of the update package and copy all files to the root directory on a USB flash drive
– Insert the USB flash drive to any available USB port on the server system to be updated
– Power on the server
– The system will automatically access the uEFI shell and begin the update process.
Or
– If the files were copied to a folder other than the root, Boot the Server to the uEFI shell. This can be accessed via the <F2> BIOS setup utility during POST or via the <F6> Boot Menu accessed during POST.
– Run the command “map -r” in the uEFI shell to mount the USB flash drive
– Run the command “fs0:” to change folders to the USB flash drive. The USB flash drive may also mount to fs1: depending on other installed devices. The number of “fs#” is dependent on the result of command “map -r”
– Change folders to the folder holding the update package files and manually start the “Startup.nsh” script file to start loading all updates
– Reboot the system after the update process has successfully completed
Verifying Updates:
– During POST, hit the <F2> Key when prompted to access the BIOS Setup Utility
– From the BIOS Setup Utility main menu, Hit the <F9> key to load BIOS Defaults
– At the MAIN menu verify the BIOS revision is correct
– Move cursor to the SERVER MANAGEMENT Menu
– Move cursor down to the SYSTEM INFORMATION Option and hit Enter
– Verify the BMC Firmware revision is correct
– Verify the SDR revision is correct
– Verify the ME Firmware revision is correct
– Configure desired BIOS Option settings
– Hit the F10 Key to save changes and Exit
Download