Intel R2000WT Server System BIOS/Firmware 1.01.0009
Tipo di file: Firmware.
Sistema Operativo: AnyOS.
Nome del file: S2600WT_EFI_BIOS0101009_ME_03.00.07.168.0_BMC_0128r8586_FRUSDR_108.zip.
Bit: 32/64 Bit.
Licenza: Gratis.
Descrizione
versioni:
– System BIOS – R01.01.1009
– ME Firmware – 03.00.07.168
– BMC Firmware – 01.28.8586
– FRUSDR – 1.08
I cambiamenti:
– ME status show “Not Ready” in SETUP(MFG mode).
– HII – Day information hard coded to always ‘Thu’ irrespective of date we save in Schedule CC page
– System intermittently reboots due to watchdog timer failure.
– The description for “boot mode” under advanced controller property gets truncated
– Set Boot Mode=UEFI via ITK,”Launch EFI Shell” will disappear.
– No video signal when enable ESRT2 UEFI BIOS and Emulex 16002B.
– Sysinfo_v13.1.6:some BIOS options should not displayed “Possible Values” in sysinfo_log.txt.
– Cannot enter BIOS setup after enabling serial console redirection for serial port B
– [E5-16xx] Wrong “Memory Array Handle” mapping cause SMBIOS Type 16/17/19/20 has wrong structure.
– [S2600WT] Not calling INT15h handler of iMR when MR OPROM loads
– “Intel Embedded Server RAID Technology 2” OpROM not show in BIOS
– [E5-16xx] Trigger MBE at channel A1 will get wrong sel log.
– BSOD under Windows 2012 R2 when hot plugging NVMe SSD drives
– [24HDD] The hot plug function of HSBP cannot work normal.
– Pressing multiple F6 from SOL skips through boot manager.
– BMC DHCP HOST NAME can not be changed if DMN is DYNAMIC and BMC
– HW RAID HII: Arrow listing is not displayed correctly when lines
– Help to integrate the LAN OPROM20 oprom.
– System sporadically hangs at post code 0x89
– [24HDD] The value of OEMID at ACPI table is not expected value.
– No Error Message display when boot into unsigned OS with secure boot enable
– ME status error with ME force update jumper
– SUT will get IERR event when enable secure boot via ITK or Syscfg.
– Windows 2012 R2 reboot cycle failed.
– [S2600WT] System locks up during OS DC cycling test
– [S2600WT] Dmesg record. Corrupted low memory after finish SLES 12 installation
– [S2600WT] VTK-125R2 can’t execute.
– Conflict message in Linux when serial port A is set as 0x2f8 and IRQ3
– After change “Active Processor Cores” , then press F10 to save Setup menu, it will pop up a fail screen as picture.
– Memory speed changes when POR setting is disabled and with a specific CPU – 3 DIMMS per channel
Nota importante:
– BIOS SETTINGS WILL BE ERASED with this update.
Download