Icom VE-PG3 RoIP Gateway Firmware 2.14
Tipo di file: Firmware.
Sistema Operativo: AnyOS.
Nome del file: vepg3_env2_14.zip.
Bit: 32/64 Bit.
Licenza: Gratis.
Descrizione
Improvements
– The default audio levels of the [Transceiver Model] items in the [Port Settings] menu have been optimized.
– The firmware update fixes the problem where communication may fail when the VE-PG3 is in the Bridge mode and it is connected to an IDAS Multi-site trunking system.
NOTA:
– If you update to firmware version 2.14, you cannot downgrade to version 2.04 or earlier versions.
– Setting files made by firmware version 2.14 cannot be used by version 2.04 or earlier.
– Make a backup of your current data before downloading and installing the firmware update.
– The procedures to optimize the audio levels with the new 2.14 firmware depend on the transceiver models connected to the TRX and EXT (if used) ports of the VE-PG3.
– Access the VE-PG3 setting screen in your web browser and select the [Port Settings] menu. Then click on the [Transceiver 1 (TRX1)], [Transceiver 2 (TRX2)], [EXT I/O 1 (EXT1)] and [EXT I/O 2 (EXT2)] (if EXT I/O ports are used) menus.
– In the [Transceiver Model] item, if IC-F5060/F6060 is selected in both TRX ports, the default audio levels will automatically be optimized after the firmware is updated. No further action is necessary.
– If the [Transceiver Model] item in either of the TRX ports is a model other than IC-F5060/F6060 or if either of the EXT ports is used, you must manually optimize the default audio levels by doing the steps below:
Initially select a model in [Transceiver Model] that is different than the model you are using, and then click <Apply>.
Finally select the model in the [Transceiver Model] that is the actual model you are using, and then again click <Apply>.
Do the steps for all TRX and EXT (if used) ports, even if one had the IC-F5060/F6060 selected.
Download