HP ProLiant MicroServer Gen8 iLO 4 Firmware 1.40
Tipo di file: Firmware.
Sistema Operativo: Windows Server 2008, Windows Server 2012.
Nome del file: cp020343.exe.
Bit: 32/64 Bit.
Licenza: Gratis.
Descrizione
Important:
– Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
The following issues are resolved in this firmware version:
– Server Auto Power-On might be triggered when iLO is reset through IPMI.
– Firmware updates that use USB Virtual Media might fail due to secure flash image corruption.
– SSH sockets might take 30 seconds to close.
– The GET_OA_INFO command output does not include the OA IPv6 address.
– The iLO 4 SNMP stack might become unresponsive to SNMP requests.
– The file upload section is not displayed on the iLO web interface Firmware page.
– The Integrated Remote Console (IRC) stops working when iLO is busy.
– The .NET Integrated Remote Console (IRC) fails to start in Chrome if a trusted certificate is not installed.
– Kerberos Keytab files cannot be added from the iLO web interface.
– An error occurs if you register for Remote Support with proxy settings, and then you delete the proxy settings.
– Directory settings information is not consistent between the iLO web interface and the scripting interfaces.
– The server shuts down when a user exits the system RBSU during an iLO reset.
– Kerberos Keytab files cannot be added when FIPS mode is enabled.
– A service event is not generated when a hard disk drive fails during boot.
– The Acquire dialog box is displayed when the remote console is started, but there is no active session to acquire.
– The status of a spare drive changes to inactive when the spare drive is in use.
– When the security override switch is enabled, long login names might fail.
– TPM status cannot be viewed by using XML scripts.
– The IPv6 default gateway might be saved as a static default gateway.
– When configured for FIPS mode/AES-DES the key exchange method ‘diffie-hellman group1 sha1’ should not be supported.
– The iLO clock fails to synchronize with NTP when a Primary Time Server is not entered.
– The iLO webserver unexpectedly quits after the NVRAM is cleared.
– The iLO DHCPv6/EBIPA address is not displayed in OA when OA is configured on an IPv6-only network.
– The Backup ROM date is displayed incorrectly on the Diagnostics page in the iLO web interface.
– The IPMI Get Sensor Reading command returns incorrect data for the Inlet Ambient sensor.
– Auto Power-On takes two minutes when the delay is set to 15, 30, 45, or 60 seconds.
– Some Power On Self Test (POST) errors might be truncated in the Integrated Management Log (IML).
– The output of the RIBCL GET_POST_STATE command shows the output for the HOST_POWER command.
– If the Shared Remote Console feature is not licensed, an error message should be displayed when a user clicks the Share button.
– iLO cannot be configured to propagate the NTP or OA time setting to the host.
– An SSH session is not logged out when AES/3DES is enabled or disabled by using the CLI.
– The iLO CLI and web interface have different length requirements for the FQDN.
– There is no warning message in the CLI when the power mode is set to OS control.
– The Login Security Banner does not work consistently between the iLO web interface and iLO scripts.
– The remote console displays multiple CD-ROM drives with the same drive letter.
– The SSH interface might freeze after multiple back-to-back connections.
– An iLO system with no installed certificates reports that the maximum number of certificates is reached.
– The temperature graph in the iLO web interface shows details for only one sensor when multiple sensors have the same coordinates.
– The SNTP settings are not displayed in the iLO web interface after a firmware update.
– An error occurs when the iLO firmware is updated by using the CLI.
– The CPU temperature is reported incorrectly.
– An event is not generated when the default language is changed by using scripts or the CLI.
– An error message is not displayed when an incorrect firmware URL is entered.
– The Integrated Management Log (IML) displays an error when a maintenance note is entered.
– An event is not generated when a power-on error occurs.
– The VLAN tag cannot be configured by using the iLO RBSU.
– The iLO firmware date is displayed incorrectly in the iLO RBSU.
– A warning message does not occur when the Local User Accounts setting is changed to Disabled for an iLO system that does not have a configured directory.
– The power-on delay options are inconsistent between the iLO web interface and the CLI.
– The Intelligent Provisioning version is not displayed on the iLO System Information > Firmware page.
– The Enterprise Secure Key Manager (ESKM) certificate is deleted if no certificate name is entered.
– The CLI labels a mismatched power supply with OK status.
– An event is not generated when a language pack update fails.
– An event is not generated when the Power Regulator settings are modified.
– WINDBG with port number 65535 cannot be enabled from the iLO CLI.
– Duplicate IP addresses are not detected.
– iLO 4 1.20 and later does not send ARP before replying to a ping request. This causes iLO 4 to be unreachable to pings from clients with teamed NICs.
– Solaris 10 and 11 cannot be installed by using Virtual Media
– The SNTP time zone offset is incorrectly applied to the time provided by the OA when c-Class blade servers are inserted into the enclosure or are e-fused.
– When the server serial number is updated in the BIOS, the system board FRU data is not updated.
This version adds support for the following features and enhancements:
– Insight Remote Support Direct Connect configuration is available in iLO 4 1.40 and later.
– iLO 4 1.40 and later supports the HP Enterprise Secure Key Manager ESKM 3.1 and later, which can be used in conjunction with HP Secure Encryption.
– Improved Java Integrated Remote Console (IRC)
– UEFI System Utilities support on the HP ProLiant DL580 Gen8 server.
– iLO Federation Management
NOTA:
– iLO Federation Management is supported on IPv4 and IPv6 networks on the iLO Dedicated Network Port. It is not supported on iLO Shared Network Port.
Download