Buffalo TS3410RN NAS Firmware 4.52
Tipo di file: Firmware.
Sistema Operativo: Windows 10, Windows 7, Windows 8, Windows 8.1, Windows Server 2008, Windows Server 2012.
Nome del file: TS5010_3010_3020_series_FW_4.52.zip.
Bit: 64 Bit.
Licenza: Gratis.
Descrizione
Added and Modified Features:
– [System] Added TS3020 series TeraStations to the list of target devices for the TS5010 and TS3010 series TeraStations’ firmware.
– [Storage] Added the “Redetect Drive” button to the USB drive list page. We recommend using the button when a connected RDX storage device shows the status as unformatted.
– [Settings] Improved the layout on the drive setup.
– [Settings] Added the “Clear” button to disappear information events on the Dashboard.
– [Email Notification] Improved notification email content for drives that cannot acquire S.M.A.R.T.
– [File Sharing] Improved stability when accessing via SMB.
Bug Correzioni:
– [System] Modified to patch vulnerabilities (CVE-2018-1160 and CVE-2019-3880).
– [Storage] Fixed a bug where a replaced drive was detected as a hot spare that was inserted when a RAID array was in degraded mode.
– [File Sharing] Fixed a bug where the backup target became inaccessible if data was backed up with access restrictions configured for subfolders.
– [Microsoft Azure Storage Sync] Fixed a bug where some settings were not saved properly.
– [Microsoft OneDrive Sync] Fixed a bug where timestamps for files were changed to the upload or download date.
– [Amazon S3] Fixed a bug where unexpected downloading occurred when enabling Amazon S3.
– [Settings] Fixed a bug where an error message appeared due to a browser cache.
– [Logs] Fixed a bug where the I70 and I71 messages appeared even if the file access logs did not exceed size limits.
Caution:
– Please consult your local technical support representative if you experience any problems caused by this firmware update.
– Do not turn the unit off until the update is finished. It will take several minutes. You will receive a message when the update is finished.
– USB drives are not mounted automatically after a firmware update. To mount them, unplug and then reconnect them.
How to Use the Updater:
1. Connect the TeraStation properly and configure the TeraStation and a computer to run the updater on the same network subnet. The subnet masks should be the same and the first three numbers of the IP addresses should be the same. The last number of the IP addresses should be different.
For example, if the IP address and subnet mask of the computer are
” 192.168.0.10 , 255.255.255.0 “
and the IP address and subnet mask of the TeraStation are
” 192.168.1.150 , 255.255.255.0 “
then the updater will _not_ work properly.
In this case, reconfigure the TeraStation’s IP address and subnet mask to
” 192.168.0.150 , 255.255.255.0 “.
Then they will be on the same subnet and the updater will work properly.
2. Close all applications. Also, stop or exit any firewall software.
3. Extract the downloaded file and run “TSUpdater.exe”. When a TeraStation is detected, an update window will open.
4. Select the TeraStation to update if multiple TeraStation are connected.
5. Click “Update” and enter the TeraStation’s admin password.
6. Click “OK”.
7. Transferring and updating the firmware will start. Wait until it finishes. The info LED will blink during the update.
8. When the update finishes, a message will be displayed.
Download