Hasselblad H5X Camera Body Firmware 3.3.3/1.1.5
Tipo di file: Firmware.
Sistema Operativo: AnyOS.
Nome del file: H5X150601.hbf.
Bit: 32/64 Bit.
Licenza: Gratis.
Descrizione
This package contains firmware version 3.3.3/1.1.5 for the H5X camera body.
Correzioni:
– Solves a rare issue where a short extra delay could be added to the exposure sequence
– When setting ISO and White Balance this is now shown on the viewfinder display
– Internal production support
Installation steps:
1. In order to perform the update the H5D sensor unit must be attached to the camera body.
2. Remove lens and viewfinder and connect the camera to the host computer using a FireWire cable. Make sure the computer has a fresh battery or is powered from the mains supply.
3. Start Phocus and when the camera is connected, as indicated by an active camera icon in the top left part of the screen, select “Update Firmware…” from the “File“ menu. Browse to the location where the update file (H5X150601.hbf) was saved and follow the instructions on screen.
4. The update procedure will take a few minutes to finish.
Avviso IMPORTANTE:
– The update should preferably be made by an authorized Hasselblad service centre .
– Please use the latest version of Phocus for firmware updating. For Windows it is strongly recommended to use the 64 bit version.
Download