Gigabyte GA-Z68XP-UD3P (rev. 1.3) Intel Rapid Storage Technology Driver 10.6.0.1002
Tipo di file: Driver.
Sistema Operativo: Windows 7, Windows Vista, Windows XP.
Nome del file: motherboard_driver_intel_sataraid_irst.exe.
Bit: 64 Bit.
Licenza: Gratis.
Descrizione
CPU
– Supporto per Intel Core i7 processors/Intel Core i5 processors/ Intel Core i3 processors/Intel Pentium processors/Intel Celeron processors in the LGA1155 package.
– L3 cache varies with CPU
Chipset
– Intel Z68 Express Chipset
Memory
– 4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory
* Due to Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB.
– Dual channel memory architecture
– Supporto per DDR3 2133/1866/1600/1333/1066 MHz memory modules
– Supporto per non-ECC memory modules
– Supporto per Extreme Memory Profile (XMP) memory modules
Onboard Graphics
Integrated Graphics Processor:
– 1 x HDMI port, supporting a maximum resolution of 1920×1200
Audio
– Realtek ALC889 codec
– High Definition Audio
– 2/4/5.1/7.1-channel
– Supporto per Dolby Home Theater
– Supporto per S/PDIF Out
LAN
– 1 x Realtek RTL8111E chip (10/100/1000 Mbit)
Expansion Slots
– 1 x PCI Express x16 slot, running at x16 (PCIEX16)
* For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.
– 1 x PCI Express x16 slot, running at x8 (PCIEX8)
* The PCIEX8 slot shares bandwidth with the PCIEX16 slot. When the PCIEX8 slot is populated, the PCIEX16 slot will operate at up to x8 mode.
* To support PCI Express 3.0, you must install an Intel 22nm CPU.
– 3 x PCI Express x1 slots
– 2 x PCI slots
Multi-Graphics Technology
– Supporto per AMD CrossFireX/NVIDIA SLI technology
* The PCIEX16 slot operates at up to x8 mode when AMD CrossFireX/NVIDIA SLI is enabled.
Storage Interface Chipset:
– 2 x SATA 6Gb/s connectors (SATA3_0~SATA3_1) supporting up to 2 SATA 6Gb/s devices
– 4 x SATA 3Gb/s connectors (SATA2_2~SATA2_5) supporting up to 4 SATA 3Gb/s devices
– Supporto per SATA RAID 0, RAID 1, RAID 5, and RAID 10
* When a RAID set is built across the SATA 6Gb/s and SATA 3Gb/s channels, the system performance of the RAID set may vary depending on the devices being connected.
Marvell 88SE9172 chip:
– 2 x SATA 6Gb/s connectors (GSATA3_6, GSATA3_7) supporting up to 2 SATA 6Gb/s devices
– Supporto per SATA RAID 0 and RAID 1
USB Chipset:
– Up to 14 USB 2.0/1.1 ports (8 on the back panel, 6 via the USB brackets connected to the internal USB headers)
2 x Etron EJ168 chips:
– Up to 4 USB 3.0/2.0 ports (2 on the back panel, 2 via the USB bracket connected to the internal USB header)
IEEE 1394
VIA VT6308 chip:
– Up to 2 IEEE 1394a ports (1 on the back panel, 1 via the IEEE 1394a bracket connected to the internal IEEE 1394a header)
Internal I/O Connectors
– 1 x 24-pin ATX main power connector
– 1 x 8-pin ATX 12V power connector
– 4 x SATA 6Gb/s connectors
– 4 x SATA 3Gb/s connectors
– 1 x CPU fan header
– 2 x system fan headers
– 1 x power fan header
– 1 x front panel header
– 1 x front panel audio header
– 1 x S/PDIF Out header
– 3 x USB 2.0/1.1 headers
– 1 x USB 3.0/2.0 header
– 1 x IEEE 1394a header
– 1 x serial port header
– 1 x clearing CMOS jumper
– 1 x Trusted Platform Module (TPM) header
Back Panel Connectors
– 1 x PS/2 keyboard/mouse port
– 1 x optical S/PDIF Out connector
– 1 x IEEE 1394 port
– 1 x HDMI port
– 8 x USB 2.0/1.1 ports
– 2 x USB 3.0/2.0 ports
– 1 x RJ-45 port
– 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker Out/Line In/Line Out/Microphone)
I/O Controller
– iTE IT8728 chip
H/W Monitoring
– System voltage detection
– CPU/System temperature detection
– CPU/System/Power fan speed detection
– CPU overheating warning
– CPU/System/Power fan fail warning
– CPU/System fan speed control
* Whether the CPU/system fan speed control function is supported will depend on the CPU/system cooler you install.
BIOS
– 2 x 32 Mbit flash
– Use of licensed AWARD BIOS
– Supporto per DualBIOS
– PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b
Unique Features
– Supporto per @BIOS
– Supporto per Q-Flash
– Supporto per Xpress BIOS Rescue
– Supporto per Download Center
– Supporto per Xpress Install
– Supporto per Xpress Recovery2
– Supporto per EasyTune
* Available functions in EasyTune may differ by motherboard model.
– Supporto per Dynamic Energy Saver 2
– Supporto per Smart 6
– Supporto per Auto Green
– Supporto per eXtreme Hard Drive (X.H.D)
– Supporto per ON/OFF Charge
– Supporto per Cloud OC
– Supporto per 3TB+ Unlock
– Supporto per TouchBIOS
– Supporto per Q-Share
Bundle Software
– Norton Internet Security (OEM version)
– Intel Smart Response Technology
– LucidLogix Virtu
* Make sure the monitor cable has been connected to the integrated graphics port on the back panel.
Form Factor
– ATX Form Factor; 30.5cm x 24.4cm
Si consiglia vivamente di utilizzare sempre la versione del driver più recente disponibile.
Non dimenticare di controllare il nostro sito il più spesso possibile per rimanere aggiornato sui driver, software e giochi più recenti.
Provare a impostare un punto di ripristino del sistema prima di installare un driver di periferica. Questo aiuterà se hai installato un driver sbagliato. I problemi possono sorgere quando il dispositivo hardware è troppo vecchio o non è più supportato.
Download